Re: HELP -- what am I missing?

Any help here? I'm stuck.....

On 07/31/2024 6:55 pm, Larry Rosenman wrote:
> Given the below config, why is this failing?
>
> playbox% ./run_branches.pl --nosend --nostatus --verbose --run-all
> syntax error at ./build-farm.conf line 405, near "# testset1 => { url
> => "git"
> Global symbol "@somewhere" requires explicit package name (did you
> forget to declare "my @somewhere"?) at ./build-farm.conf line 405.
> Global symbol "@somewhere" requires explicit package name (did you
> forget to declare "my @somewhere"?) at ./build-farm.conf line 408.
> Unknown regexp modifier "/M" at ./build-farm.conf line 408, at end of
> line
> Unknown regexp modifier "/r" at ./build-farm.conf line 408, at end of
> line
> Unknown regexp modifier "/f" at ./build-farm.conf line 408, at end of
> line
> Unknown regexp modifier "/t" at ./build-farm.conf line 408, at end of
> line
> Unknown regexp modifier "/B" at ./build-farm.conf line 408, at end of
> line
> Regexp modifiers "/u" and "/l" are mutually exclusive at
> ./build-farm.conf line 408, at end of line
> Regexp modifiers "/u" and "/d" are mutually exclusive at
> ./build-farm.conf line 408, at end of line
> ./build-farm.conf has too many errors.
> Compilation failed in require at ./run_branches.pl line 86.
> playbox%
>
> # -*-perl-*- hey - emacs - this is a perl file
>
> =comment
>
> Copyright (c) 2003-2022, Andrew Dunstan
>
> See accompanying License file for license details
>
> =cut
>
> package PGBuild; ## no critic (RequireFilenameMatchesPackage)
>
> use strict;
>
> use warnings FATAL => 'qw';
>
> our (%conf);
>
> # our($VERSION); $VERSION = 'REL_17';
>
> my $branch;
> {
> no warnings 'once';
> $branch = $main::branch;
> }
>
>
> # useful for making settings relative to the config file location
> # all the clients should have used these two standard packages
> my $confdir = File::Spec->rel2abs(File::Basename::dirname(__FILE__));
>
> # to force from-source in the directory where this config file is
> located,
> # uncomment the line below. See also buildroot below
> # $PGBuild::Options::from_source = $confdir;
>
> %conf = (
>
> # identity
> animal => "anaconda",
> secret => "<elided>",
>
> # source code
> scm => 'git', # or 'cvs'
> git_keep_mirror => 1, # manage a git mirror in the build
> root
> git_ignore_mirror_failure => 1, # ignore failures in fetching to
> mirror
> git_gc_hours => 7 * 24, # garbage collect once a week, 0/undef to
> disable
>
> # use symlinked git repo from non-HEAD branches, like git-new-workdir
> does
> # Ony supported on Windows if the user has "Create Symbolic Links"
> # privilege. See
> # https://github.com/git-for-windows/git/wiki/Symbolic-Links
> git_use_workdirs => 1,
>
> # remove work trees between runs, saves disk space
> rm_worktrees => 1,
>
> # check if the default git branch name has changed
> skip_git_default_check => undef,
>
> scmrepo => undef, # default is community repo for either type
> scm_url => undef, # webref for diffs on server - use default for
> community
>
> # git_reference => undef, # for --reference on git repo
>
> # external commands and control
> make => 'gmake', # or gmake if required. can include path if
> necessary.
> make_jobs => 2, # >1 for parallel "make" and "make check" steps
> tar_log_cmd => undef, # default is "tar -z -cf runlogs.tgz *.log"
> # replacement must have the same effect
>
> # archive this many copies of the report summary
> archive_reports => undef,
>
> # if on, print the whole web request object if there is a web error
> show_error_request => undef,
>
> # Only works if the Unix::Uptime module is available
> # inhibits a run if > 0 and the load average in last 1 minute or 5
> minutes
> # has been greater than this
> max_load_avg => undef,
>
> # max time in seconds allowed for a single branch run
> # undef/0 means unlimited
> wait_timeout => undef,
>
> # if true run installcheck-parallel instead of installcheck
> use_installcheck_parallel => undef,
>
> # where and how to build
> # must be absolute, can be either Unix or Windows style for MSVC
> # undef means default, buildroot dir in script directory
> # "$confdir/buildroot" means buildroot in the config file's directory,
> # which is useful for auto from-source setups
> build_root => undef, # or '/path/to/buildroot',
> use_vpath => undef, # set true to do vpath builds
>
> # valgrind settings - default is don't use valgrind
> # It will use the .supp file in the source code so that's not in the
> # options here.
> use_valgrind => undef,
> valgrind_options => join(
> ' ', qw{--quiet --trace-children=yes
> --track-origins=yes --read-var-info=yes --num-callers=20
> --leak-check=no --gen-suppressions=all --error-limit=no}
> ),
>
> # if true run tests with debug_discard_caches=1, or the equivalent
> # on older branches. Do not set CLOBBER_CACHE_ALWAYS if you use this.
> use_discard_caches => undef,
>
> # path to directory with auxiliary web script
> # if relative, the must be relative to buildroot/branch
> # Now only used on older Msys installations
> # aux_path => "../..",
>
> keep_error_builds => 0,
> core_file_glob => "*core*", # should work for both Linux and *BSD
>
> # where to report status
> target => "https://buildfarm.postgresql.org/cgi-bin/pgstatus.pl",
>
> # where to report change in OS version or compiler version
> upgrade_target =>
> "https://buildfarm.postgresql.org/cgi-bin/upgrade.pl",
>
> # change this to a true value if using MSVC, in which case also
> # see MSVC section below
>
> using_msvc => undef,
>
> # if force_every is a scalar it will be used on all branches, like
> this
> # for legacy reasons:
> # force_every => 336 , # max hours between builds, undef or 0 =
> unforced
> # we now prefer it to be a hash with branch names as the keys, like
> this
> #
> # this setting should be kept conservatively high, or not used at all
> -
> # for the most part it's best to let the script decide if something
> # has changed that requires a new run for the branch.
> #
> # an entry with a name of 'default' matches any branch not named
> force_every => {
>
> # HEAD => 48,
> # default => 168,
> },
>
> # alerts are triggered if the server doesn't see a build on a branch
> after
> # this many hours, and then sent out every so often,
>
> alerts => {
>
> # HEAD => { alert_after => 72, alert_every => 24 },
> # REL_10_STABLE => { alert_after => 240, alert_every => 48 },
> },
>
> # include / exclude patterns for files that trigger a build
> # if both are specified then they are both applied as filters
> # undef means don't ignore anything.
> # exclude qr[^doc/|\.po$] to ignore changes to docs and po files
> # (recommended)
> # undef means null filter.
> trigger_exclude => qr[^doc/|\.po$],
> trigger_include => undef,
>
> # settings for mail notices - default to notifying nobody
> # these lists contain addresses to be notified
> # must be complete email addresses, as the email is sent from the
> server
>
> mail_events => {
> all => ["ler\(at)lerctr(dot)org"], # unconditional
> fail => [], # if this build fails
> change => [], # if this build causes a state change
> green => [], # if this build causes a state change to/from OK
> },
>
> # if this flag is set and ccache is used, an unsuccessful run will
> result
> # in the removal of the ccache directory (and you need to make sure
> that
> # its parent is writable). The default is off - ccache should be able
> to
> # handle failures, although there have been suspicions in the past
> that
> # it's not quite as reliable as we'd want, and thus we have this
> option.
>
> ccache_failure_remove => undef,
>
> # set this if you want to use ccache with the default ccache directory
> # location, effectively $buildroot/ccache-$animal.
>
> use_default_ccache_dir => 1,
>
> # set this to allow caching of the configure script's results
>
> use_accache => 1,
>
> # env settings to apply within build/report process
> # these settings will be seen by all the processes, including the
> # configure process.
>
> build_env => {
>
> # use a dedicated cache for the build farm. this should give us
> # very high hit rates and slightly faster cache searching.
> #
> # only set this if you want to set your own path for the ccache
> # directory
> # CCACHE_DIR => "/path/to/your/ccache",
>
> ### use these settings for Cygwin - adjust dumper path to be correct
> ## see https://cygwin.org/cygwin-ug-net/using-cygwinenv.html
> # CYGWIN => 'error_start=c:\cygwin\bin\dumper.exe -d %1 %2',
>
> ## Cygwin is known to choke on many concurrent connections, so
> ## reign back the regression test parallelism
> # MAX_CONNECTIONS => '3',
>
> ### set this if you need a proxy setting for the
> # outbound web transaction that reports the results
> # BF_PROXY => 'http://my.proxy.server:portnum/',
>
> # see below for MSVC settings
>
> # possibly set this to something high if you get pg_ctl failures
> # default is 120
> # PGCTLTIMEOUT => '120',
>
> # run extra TAP tests if listed here
> # These are the ones omitted without the setting
> # on a secure single user system it makes sense to enable these
> # PG_TEST_EXTRA => "ssl ldap kerberos",
>
> # Where to put port locks. Default is the buildroot
> # PG_TEST_PORT_DIR => 'some path',
> },
>
> # env settings to pass to configure. These settings will only be seen
> by
> # configure.
> config_env => {
>
> # comment out if not using ccache
> # ccache is known to cause issues sometimes on msys2
> # don't set CC at all if using MSVC, especially with meson
> CC => 'ccache cc',
>
> # If using vpath builds, this makes it use true symbolic links
> # on Msys2. Only use if the user has Create Symbolic Links privilege
> # See https://github.com/git-for-windows/git/wiki/Symbolic-Links
> # MSYS => 'winsymlinks:nativestrict',
>
> # In the rare event that you need to tell configure where the prove
> # program lives instead of letting it work it out you do it here.
> # Msys is one such case.
> # PROVE => '/bin/prove',
>
> # CPPFLAGS can be set here and picked up by configure
> # This example makes the regression tests run with extra
> # checking of user names created by the tests
> # CPPFLAGS => '-DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS',
>
> # where to find a usable pkg-config or equivalent
> # see for example https://github.com/pkgconf/pkgconf
> # PKG_CONFIG => 'c:/path/to/pkg-config.exe',
> # PATH-style list of extra directories to search for .pc files
> # PKG_CONFIG_PATH => 'c:/path/to/libxml/pkgconfig',
> },
>
> # settings added to those in config_env if valgrind is being used
> valgrind_config_env_extra => {
>
> CFLAGS => "-fno-omit-frame-pointer -O0 -fPIC",
> CPPFLAGS => "-DUSE_VALGRIND -DRELCACHE_FORCE_RELEASE",
> },
>
> # don't use --prefix or --with-pgport here
> # they are set up by the script
> # per-branch config can be done here or
> # more simply by using the examples below.
> # (default ldap flag is below because it's not supported in all
> branches)
>
> # see below for MSVC config
>
> # set true if running with meson
> # will be ignored for branches older than 16
> using_meson => undef,
>
> # similar to make_jobs above - how much parallelism do you want for
> # meson's build and test stages. undef says use meson's default. (1?)
> meson_jobs => undef,
>
> # timeout multiplier for meson test jobs.
> # default if value is undefined is 3, 0 means no timeout
> meson_test_timeout => undef,
>
> # options used with configure (and not for meson)
> config_opts => [
> qw(
> --enable-cassert
> --enable-debug
> --enable-nls
> --with-perl
> --with-python
> --with-tcl
> --with-openssl
> --with-ldap
> --with-libxml
> --with-libxslt
> --with-includes=/usr/local/include
> --with-libraries=/usr/local/lib
> ),
>
> # could also add for example --enable-tap-tests
> ],
>
> # Note, for meson we turn off all the auto options and then
> selectively
> # re-enable them using these options, so zlib and readline have to be
> # explicitly enabled here.
> # see meson docs re interaction of buildtype, debug and
> # optimization settings. debugoptimised = debug:on + optimisation:2
> meson_opts => [
> qw(
> -Dcassert=true
> -Dbuildtype=debugoptimized
> -Dnls=enabled
> -Dplperl=enabled
> -Dplpython=enabled
> -Dpltcl=enabled
> -Dgssapi=enabled
> -Dssl=openssl
> -Dldap=enabled
> -Dlibxml=enabled
> -Dlibxslt=enabled
> -Dzlib=enabled
> -Dreadline=enabled
> ),
>
> # could for example add -Dtap_tests=enabled
> ],
>
> # per-branch contents of extra config for check stages.
> # each branch has an array of setting lines (no \n required)
> # a DEFAULT entry is used for all branches, before any
> # branch-specific settings.
> extra_config => {
> DEFAULT => [
> q(log_line_prefix = '%m [%p:%l] %q%a '),
> "log_connections = 'true'",
> "log_disconnections = 'true'",
> "log_statement = 'all'",
> "fsync = off"
> ],
> HEAD => ['debug_parallel_query = regress'],
> },
>
> optional_steps => {
>
> # which optional steps to run and when to run them
> # valid keys are: branches, dow, min_hours_since, min_hour, max_hour
> # find_typedefs => { branches => ['HEAD'], dow => [1,4],
> # min_hours_since => 25 },
> # build_docs => {min_hours_since => 24},
> },
>
> # string list of doc targets to build in addition to html
> # could be "man postgres-US.pdf postgres-A4.pdf epub"
> # see doc/src/sgml/Makefile for complete list
> extra_doc_targets => undef,
>
> # locales to test
>
> locales => [qw( C )],
>
> # port number actually used will be based on this param and the
> branch,
> # so we ensure they don't collide
>
> base_port => 5678,
>
> modules => [qw(TestUpgrade TestDecoding)],
>
> # settings used by run_branches.pl
> global => {
> branches_to_build => 'ALL',
>
> # or 'HEAD_PLUS_LATEST' or 'HEAD_PLUS_LATEST2'
> # or 'STABLE' (i.e. live branches other than HEAD)
> # or [qw( HEAD RELx_y_STABLE etc )]
>
> # set this if running multiple animals to have them coordinated
> # default is this animal's buildroot.
> global_lock_dir => "/home/pgbuildfarm/locks,
>
> # settings for parallel runs
> parallel_lockdir => undef, # default is global_lock_dir
> parallel_stagger => undef, # default 60
> max_parallel => undef, # default 10
>
> },
>
> my_tap_tests => {
>
> # settings for module TestMyTap:
> # branch setting can be missing altogether, in which case 'main' is
> # used, or it can be a scalar, in which case that is used for all
> # branches, or it can be a hashref, in which case the value used
> # corresponds to the pg branch being used. 'default' is specified,
> # is for any branch not otherwise specified. If PGBRANCH is mapped,
> # then the Postgres branch is used.
> #
> # testset1 => { url => "git(at)somewhere(dot)com/testrepo.git",
> # branch => 'mymainbranch' # default is 'main'
> # },
> # testset2 => { url => "git(at)somewhere-else(dot)com/othertestrepo.git",
> # branch => { HEAD => 'main',
> # default => 'PGBRANCH' },
> # },
> },
>
> );
>
>
> # MSVC setup
>
> if ($conf{using_msvc})
> {
> # get the settings from the VisualStudio installation
>
> require "PGBuild/VSenv.pm"; ## no critic (RequireBarewordIncludes)
>
> # ancestor of vcvarsall.bat script we will use
> my $VSdir = "c:/Program Files (x86)/Microsoft Visual Studio/2019";
>
> # the more specific you are here the quicker the search will be
> # e.g.
> # $VSdir = "$VSdir/BuildTools/VC/Auxiliary/Build";
>
> my $vsenv = PGBuild::VSenv::getenv($VSdir, 'x64');
>
> # add other elements to the PATH, LIB and INCLUDE if needed
> $vsenv->{PATH} =
> join(';', 'c:/prog/depend/bin', 'c:/other/bin', $vsenv->{PATH});
>
> %{ $conf{build_env} } = (%{ $conf{build_env} }, %$vsenv);
>
> # MSVC non-meson needs a somewhat different style of config opts
> (why??)
> # What we write here will be literally (via Data::Dumper) put into
> # the config.pl file for the MSVC build.
>
> # This will be ignored for meson builds, which use meson_opts rather
> # than config_opts. See above for meson_opts.
>
> $conf{config_opts} = {
> asserts => 1, # --enable-cassert
> integer_datetimes => 1, # --enable-integer-datetimes
> nls => undef, # --enable-nls=<path>
> tcl => 'c:\tcl', # --with-tcl=<path>
> perl => 'c:\perl', # --with-perl=<path>
> python => 'c:\python25', # --with-python=<path>
> krb5 => undef, # --with-krb5=<path>
> ldap => 0, # --with-ldap
> openssl => undef, # --with-ssl=<path>
> xml => undef, # --with-libxml=<path>
> xslt => undef, # --with-libxslt=<path>,
> iconv => undef, # path to iconv library
> zlib => undef, # --with-zlib=<path>
> tap_tests => undef, # --enable-tap-tests
> };
>
> }
>
> ##################################
> #
> # examples of per branch processing
> # tailor as required for your site.
> #
> ##################################
> if ($branch eq 'HEAD')
> {
>
> # push(@{$conf{config_opts}},"--enable-depend");
>
> # Note that config_opts is a hashref for MSVC, rather than
> # an arrayref like elsewhere. That means the right way to set
> # semething there is like this:
> #
> # $conf{config_opts}->{openssl} = 'c:\path\to\openssl\installation';
> }
> elsif ($branch =~ /^REL7_/)
> {
>
> # push(@{$conf{config_opts}},"--without-tk");
> }
>
> 1;

--
Larry Rosenman http://www.lerctr.org/~ler
Phone: +1 214-642-9640 E-Mail: ler(at)lerctr(dot)org
US Mail: 13425 Ranch Road 620 N, Apt 718, Austin, TX 78717-1010