Problems installing DBI

Hi. I am completely new to CYGWIN, having installed it on my Win 2000
machine yesterday. I have installed PostgreSQL (through the CYGWIN setup),
and that's running fine.

I have installed Perl too (also through the CYGWIN setup), but am now having
trouble installing DBI and Pg. I am trying to use CPAN to install these, and
below are the results when I attempt to install DBI. (My apologies if a
similar problem has already been posted; I couldn't find an answer in the
archives).

---

$ cpan

cpan shell -- CPAN exploration and modules installation (v1.59_54)
ReadLine support enabled

cpan> install DBI
Going to read /home/Emily.Boyd/.cpan/sources/authors/01mailrc.txt.gz
CPAN: Compress::Zlib loaded ok
Going to read
/home/Emily.Boyd/.cpan/sources/modules/02packages.details.txt.gz
Database was generated on Thu, 22 Aug 2002 22:52:17 GMT
HTTP::Date not available

There's a new CPAN.pm version (v1.62) available!
[Current version is v1.59_54]
You might want to try
install Bundle::CPAN
reload cpan
without quitting the current session. It should be a seamless upgrade
while we are running...

Going to read /home/Emily.Boyd/.cpan/sources/modules/03modlist.data.gz
Running install for module DBI
Running make for T/TI/TIMB/DBI-1.30.tar.gz
CPAN: MD5 loaded ok
Checksum for
/home/Emily.Boyd/.cpan/sources/authors/id/T/TI/TIMB/DBI-1.30.tar.gz
ok
Scanning cache /home/Emily.Boyd/.cpan/build for sizes
DBI-1.30/
DBI-1.30/DBI.xs
DBI-1.30/t/
DBI-1.30/t/80proxy.t
DBI-1.30/t/30subclass.t
DBI-1.30/t/70shell.t
DBI-1.30/t/60preparse.t
DBI-1.30/t/20meta.t
DBI-1.30/t/40profile.t
DBI-1.30/t/15array.t
DBI-1.30/t/10examp.t
DBI-1.30/t/04mods.t
DBI-1.30/t/02dbidrv.t
DBI-1.30/t/01basics.t
DBI-1.30/t/05thrclone.t
DBI-1.30/t/03hleak.t
DBI-1.30/Driver_xst.h
DBI-1.30/lib/
DBI-1.30/lib/DBD/
DBI-1.30/lib/DBD/Proxy.pm
DBI-1.30/lib/DBD/NullP.pm
DBI-1.30/lib/DBD/Sponge.pm
DBI-1.30/lib/DBD/ExampleP.pm
DBI-1.30/lib/DBI/
DBI-1.30/lib/DBI/Const/
DBI-1.30/lib/DBI/Const/GetInfoType.pm
DBI-1.30/lib/DBI/Const/GetInfo/
DBI-1.30/lib/DBI/Const/GetInfo/ODBC.pm
DBI-1.30/lib/DBI/Const/GetInfo/ANSI.pm
DBI-1.30/lib/DBI/Const/GetInfoReturn.pm
DBI-1.30/lib/DBI/Format.pm
DBI-1.30/lib/DBI/FAQ.pm
DBI-1.30/lib/DBI/W32ODBC.pm
DBI-1.30/lib/DBI/Shell.pm
DBI-1.30/lib/DBI/Profile.pm
DBI-1.30/lib/DBI/ProxyServer.pm
DBI-1.30/lib/DBI/DBD.pm
DBI-1.30/lib/DBI/PurePerl.pm
DBI-1.30/lib/Bundle/
DBI-1.30/lib/Bundle/DBI.pm
DBI-1.30/lib/Win32/
DBI-1.30/lib/Win32/DBIODBC.pm
DBI-1.30/Changes
DBI-1.30/DBIXS.h
DBI-1.30/MANIFEST
DBI-1.30/dbiproxy.PL
DBI-1.30/Perl.xs
DBI-1.30/dbish.PL
DBI-1.30/Driver.xst
DBI-1.30/dbi_sql.h
DBI-1.30/dbd_xsh.h
DBI-1.30/DBI.pm
DBI-1.30/ToDo
DBI-1.30/test.pl
DBI-1.30/dbipport.h
DBI-1.30/README
DBI-1.30/Makefile.PL
Removing previously used /home/Emily.Boyd/.cpan/build/DBI-1.30

CPAN.pm: Going to build T/TI/TIMB/DBI-1.30.tar.gz

*** Note:
The optional PlRPC-modules (RPC::PlServer etc) are not installed.
If you want to use the DBD::Proxy driver and DBI::ProxyServer
modules, then you'll need to install the RPC::PlServer, RPC::PlClient,
Storable and Net::Daemon modules. The CPAN Bundle::DBI may help you.
You can install them any time after installing the DBI.
You do *not* need these modules for typical DBI usage.

Optional modules are available from any CPAN mirror, in particular
http://www.perl.com/CPAN/modules/by-module
http://www.perl.org/CPAN/modules/by-module
ftp://ftp.funet.fi/pub/languages/perl/CPAN/modules/by-module

Creating extra DBI::PurePerl test: t/zz_01basics_pp.t
Creating extra DBI::PurePerl test: t/zz_02dbidrv_pp.t
Creating extra DBI::PurePerl test: t/zz_03hleak_pp.t
Creating extra DBI::PurePerl test: t/zz_04mods_pp.t
Creating extra DBI::PurePerl test: t/zz_05thrclone_pp.t
Creating extra DBI::PurePerl test: t/zz_10examp_pp.t
Creating extra DBI::PurePerl test: t/zz_15array_pp.t
Creating extra DBI::PurePerl test: t/zz_20meta_pp.t
Creating extra DBI::PurePerl test: t/zz_30subclass_pp.t
Creating extra DBI::PurePerl test: t/zz_40profile_pp.t
Creating extra DBI::PurePerl test: t/zz_60preparse_pp.t
Creating extra DBI::PurePerl test: t/zz_70shell_pp.t
Creating extra DBI::PurePerl test: t/zz_80proxy_pp.t
Checking if your kit is complete...
Looks good
Writing Makefile for DBI

Remember to actually *read* the README file!
Use 'make' to build the software (dmake or nmake on Windows).
Then 'make test' to execute self tests.
Then 'make install' to install the DBI and then delete this working
directory before unpacking and building any DBD::* drivers.

/usr/bin/perl -I/usr/lib/perl5/5.6.1/cygwin-multi -I/usr/lib/perl5/5.6.1 -ME
xtUtils::Command -e mkpath blib/lib/DBI
rm -f blib/lib/DBI/Changes.pm
cp Changes blib/lib/DBI/Changes.pm
cp Driver_xst.h blib/arch/auto/DBI/Driver_xst.h
cp DBIXS.h blib/arch/auto/DBI/DBIXS.h
cp lib/DBD/NullP.pm blib/lib/DBD/NullP.pm
cp dbipport.h blib/arch/auto/DBI/dbipport.h
cp lib/DBI/Format.pm blib/lib/DBI/Format.pm
cp lib/DBI/Const/GetInfoReturn.pm blib/lib/DBI/Const/GetInfoReturn.pm
cp dbd_xsh.h blib/arch/auto/DBI/dbd_xsh.h
cp lib/DBI/Const/GetInfo/ANSI.pm blib/lib/DBI/Const/GetInfo/ANSI.pm
cp lib/DBI/PurePerl.pm blib/lib/DBI/PurePerl.pm
cp lib/DBI/Profile.pm blib/lib/DBI/Profile.pm
cp lib/DBI/Shell.pm blib/lib/DBI/Shell.pm
cp lib/DBI/FAQ.pm blib/lib/DBI/FAQ.pm
cp DBI.pm blib/lib/DBI.pm
cp lib/DBD/ExampleP.pm blib/lib/DBD/ExampleP.pm
cp lib/Bundle/DBI.pm blib/lib/Bundle/DBI.pm
cp lib/Win32/DBIODBC.pm blib/lib/Win32/DBIODBC.pm
cp lib/DBI/W32ODBC.pm blib/lib/DBI/W32ODBC.pm
cp lib/DBI/DBD.pm blib/lib/DBI/DBD.pm
cp lib/DBI/Const/GetInfoType.pm blib/lib/DBI/Const/GetInfoType.pm
cp lib/DBI/ProxyServer.pm blib/lib/DBI/ProxyServer.pm
cp lib/DBD/Proxy.pm blib/lib/DBD/Proxy.pm
cp dbi_sql.h blib/arch/auto/DBI/dbi_sql.h
cp Driver.xst blib/arch/auto/DBI/Driver.xst
cp lib/DBI/Const/GetInfo/ODBC.pm blib/lib/DBI/Const/GetInfo/ODBC.pm
cp lib/DBD/Sponge.pm blib/lib/DBD/Sponge.pm
/usr/bin/perl -p -e "s/~DRIVER~/Perl/g" < blib/arch/auto/DBI/Driver.xst >
Perl.xsi
/usr/bin/perl -I/usr/lib/perl5/5.6.1/cygwin-multi -I/usr/lib/perl5/5.6.1
/usr/lib/perl5/5.6.1/ExtUtils/xsubpp -typemap
/usr/lib/perl5/5.6.1/ExtUtils/typemap Perl.xs > Perl.xsc && mv Perl.xsc
Perl.c
gcc -c -DPERL_USE_SAFE_PUTENV -fno-strict-aliasing -I/usr/local/include -DU
SEIM
ORTLIB -O2 -DVERSION=\"1.30\" -DXS_VERSION=\"1.30\" -I/usr/lib/perl5/5.6.
1/cygwin-multi/CORE -Wall -Wno-comment -DDBI_NO_THREADS Perl.c
dbipport.h:529: warning: `my_sv_2pvbyte' defined but not used
/usr/bin/perl -I/usr/lib/perl5/5.6.1/cygwin-multi -I/usr/lib/perl5/5.6.1
/usr/lib/perl5/5.6.1/ExtUtils/xsubpp -typemap
/usr/lib/perl5/5.6.1/ExtUtils/typemap DBI.xs > DBI.xsc && mv DBI.xsc DBI.c
gcc -c -DPERL_USE_SAFE_PUTENV -fno-strict-aliasing -I/usr/local/include -DU
SEIM
ORTLIB -O2 -DVERSION=\"1.30\" -DXS_VERSION=\"1.30\" -I/usr/lib/perl5/5.6.
1/cygwin-multi/CORE -Wall -Wno-comment -DDBI_NO_THREADS DBI.c
DBI.xs: In function `dbih_clearcom':
DBI.xs:974: warning: unused variable `my_perl'
DBI.xs:973: warning: unused variable `Perl___notused'
DBI.xs: In function `dbih_get_fbav':
DBI.xs:1113: warning: unused variable `Perl___notused'
DBI.xs: In function `dbih_set_attr_k':
DBI.xs:1279: warning: unused variable `Perl___notused'
DBI.xs:1205: warning: unused variable `Perl___notused'
DBI.xs: In function `log_where':
DBI.xs:1728: warning: unused variable `Perl___notused'
DBI.xs: In function `XS_DBI_dispatch':
DBI.xs:2410: warning: unused variable `Perl___notused'
DBI.c: At top level:
dbipport.h:529: warning: `my_sv_2pvbyte' defined but not used
DBIXS.h:411: warning: `get_dbistate' defined but not used
Running Mkbootstrap for DBI ()
chmod 644 DBI.bs
rm -f blib/arch/auto/DBI/DBI.dll
LD_RUN_PATH="" ld2 -s -L/usr/local/lib DBI.o -o blib/arch/auto/DBI/DBI.dll
/usr/lib/perl5/5.6.1/cygwin-multi/CORE/libperl5_6_1.a
dllwrap --dllname DBI.dll --driver-name gcc --dlltool
dlltool --export-all-symbols --as as --output-def libDBI.def --output-lib
libDBI.a \
-s -L/usr/local/lib DBI.o
/usr/lib/perl5/5.6.1/cygwin-multi/CORE/libperl5_6_1.a

dllwrap: no export definition file provided.
Creating one, but that may not be what you want
/usr/lib/gcc-lib/i686-pc-cygwin/2.95.3-5/../../../../i686-pc-cygwin/bin/ld:
cannot find -luser32
collect2: ld returned 1 exit status
dllwrap: gcc exited with status 1
perlld: *** system() failed to execute
dllwrap --dllname DBI.dll --driver-name gcc --dlltool
dlltool --export-all-symbols --as as --output-def libDBI.def --output-lib
libDBI.a \
-s -L/usr/local/lib DBI.o
/usr/lib/perl5/5.6.1/cygwin-multi/CORE/libperl5_6_1.a

make: *** [blib/arch/auto/DBI/DBI.dll] Error 1
/usr/bin/make -- NOT OK
Running make test
Can't test without successful make
Running make install
make had returned bad status, install seems impossible

cpan>

---

I am wondering if I've missed something that should have been installed
earlier, or if I'm doing something completely wrong here. I would really
appreciate any suggestions. Thanks!

Emily