Re: --with-tcl

Thank you for suggestion, however,

$ locate tclConfig.sh
/usr/local/lib/tcl8.0/tclConfig.sh
/usr/local/lib/tcl8.3/tclConfig.sh

so that should be ok, and as I said, it worked with 7.2

Regards,

Aasmund.
* Brett Schwarz <brett_schwarz(at)yahoo(dot)com> wrote:
> Are you sure that the tclConfig.sh file is located in
> /usr/local/lib/tcl8.3/ ?
>
> By default, Tcl would install with PREFIX=/usr/local and then the
> tclConfig.sh file will be installed in /usr/local/lib
>
> Check to make sure that the tclConfig.sh file is where you specified it,
> and make sure it is valid...
>
> --brett
>
> On Mon, 2002-12-02 at 15:50, Aasmund Midttun Godal wrote:
> > Thank you for responding,
> >
> > However, I hva all the tcl files installed, including tcl.h, and it worked
> > with Pg 7.2
> >
> > Regards,
> >
> > Aasmund.
> >
> > * Tommi Maekitalo <t(dot)maekitalo(at)epgmbh(dot)de> wrote:
> > > Hi,
> > >
> > > tcl.h is missing. You have to install the developmentfiles of tcl.
> > Normally
> > > you can find it in tc-devel if you have linux. Configure should have
> > > complained about it.
> > >
> > >
> > > Tommi
> > >
> > >
> > > Am Montag, 2. Dezember 2002 07:49 schrieb Aasmund Midttun Godal:
> > > > Oh, and it's 7.3, obviously, sorry.
> > > >
> > > > Regards,
> > > >
> > > > Aasmund.
> > > >
> > > > * Aasmund Midttun Godal <postgresql(at)aasmund(dot)com> wrote:
> > > > > Hi!
> > > > >
> > > > > I am having trouble compiling postgres with tcl on OpenBSD. I have
> > both
> > > > > 8.0 and 8.3, and I have tried compiling with both of them. I also
> > tried
> > > > > w/o tk. I tried editing lipgtcl.h and adding the path to tcl.h with
> > no
> > > > > success. Compiling without tcl is no problem. configuring works fine,
> > > >
> > > > but
> > > >
> > > > > it fails at compile time. Here are my configure commands:
> > > > >
> > > > > ./configure --with-perl --with-tcl --with-
> > > > > tclconfig=/usr/local/lib/tcl8.3/ --without-tk
> > > > >
> > > > > ./configure --with-perl --with-tcl --with-
> > > > > tclconfig=/usr/local/lib/tcl8.3/ --with-
> > tkconfig=/usr/local/lib/tk8.3/
> > > > >
> > > > > ./configure --with-perl --with-tcl --with-
> > > >
> > > > tclconfig=/usr/local/lib/tk8.0/ -
> > > >
> > > > > -with-tclconfig=/usr/local/lib/tk8.0/
> > > > >
> > > > > ./configure --with-tcl --with-tkconfig=/usr/local/lib/tk8.0/
> > > > >
> > > > > ./configure --with-tcl --without-tk
> > > > >
> > > > >
> > > > > Below is compilation error, it is, I believe, identical on all
> > > > > configurations.
> > > > >
> > > > > All help will be greatly appreciated!
> > > > >
> > > > > Regards,
> > > > >
> > > > > Aasmund.
> > > > >
> > > > >
> > > > > gcc -O2 -pipe -Wall -Wmissing-prototypes -Wmissing-declarations -
> > fpic -
> > > > > DPIC -I../../../src/interfaces/libpq -I../../../src/include -c -o
> > > > > pgtcl.o pgtcl.c
> > > > > In file included from pgtcl.c:19:
> > > > > libpgtcl.h:19: tcl.h: No such file or directory
> > > > > In file included from pgtcl.c:20:
> > > > > pgtclCmds.h:17: tcl.h: No such file or directory
> > > > > In file included from pgtcl.c:19:
> > > > > libpgtcl.h:21: syntax error before `*'
> > > > > libpgtcl.h:22: syntax error before `*'
> > > > > In file included from pgtcl.c:20:
> > > > > pgtclCmds.h:47: syntax error before `Tcl_Interp'
> > > > > pgtclCmds.h:90: syntax error before `cData'
> > > > > pgtclCmds.h:92: syntax error before `cData'
> > > > > pgtclCmds.h:94: syntax error before `cData'
> > > > > pgtclCmds.h:96: syntax error before `cData'
> > > > > pgtclCmds.h:98: syntax error before `cData'
> > > > > pgtclCmds.h:100: syntax error before `cData'
> > > > > pgtclCmds.h:102: syntax error before `cData'
> > > > > pgtclCmds.h:104: syntax error before `cData'
> > > > > pgtclCmds.h:106: syntax error before `cData'
> > > > > pgtclCmds.h:118: syntax error before `cData'
> > > > > pgtclCmds.h:120: syntax error before `cData'
> > > > > pgtclCmds.h:123: syntax error before `cData'
> > > > > pgtclCmds.h:125: syntax error before `cData'
> > > > > pgtclCmds.h:127: syntax error before `cData'
> > > > > pgtclCmds.h:129: syntax error before `cData'
> > > > > pgtclCmds.h:131: syntax error before `cData'
> > > > > pgtclCmds.h:133: syntax error before `cData'
> > > > > pgtclCmds.h:135: syntax error before `cData'
> > > > > pgtclCmds.h:137: syntax error before `cData'
> > > > > In file included from pgtcl.c:21:
> > > > > pgtclId.h:18: syntax error before `*'
> > > > > pgtclId.h:37: syntax error before `*'
> > > > > pgtclId.h:39: syntax error before `cData'
> > > > > pgtclId.h:40: syntax error before `cData'
> > > > > pgtclId.h:41: syntax error before `cData'
> > > > > pgtclId.h:42: syntax error before `*'
> > > > > pgtclId.h:43: syntax error before `*'
> > > > > pgtclId.h:44: syntax error before `*'
> > > > > pgtclId.h:45: syntax error before `*'
> > > > > pgtclId.h:50: syntax error before `clientData'
> > > > > pgtclId.h:63: syntax error before `Pg_ConnType'
> > > > > pgtclId.h:63: warning: type defaults to `int' in declaration of
> > > > > `Pg_ConnType'
> > > > > pgtclId.h:63: warning: data definition has no type or storage class
> > > > > pgtcl.c:30: syntax error before `*'
> > > > > pgtcl.c:31: warning: no previous prototype for `Pgtcl_Init'
> > > > > pgtcl.c: In function `Pgtcl_Init':
> > > > > pgtcl.c:48: warning: implicit declaration of function `Tcl_GetDouble'
> > > > > pgtcl.c:48: `interp' undeclared (first use in this function)
> > > > > pgtcl.c:48: (Each undeclared identifier is reported only once
> > > > > pgtcl.c:48: for each function it appears in.)
> > > > > pgtcl.c:48: warning: implicit declaration of function `Tcl_GetVar'
> > > > > pgtcl.c:48: `TCL_GLOBAL_ONLY' undeclared (first use in this function)
> > > > > pgtcl.c:53: warning: implicit declaration of function
> > `Tcl_CreateCommand'
> > > > > pgtcl.c:56: `ClientData' undeclared (first use in this function)
> > > > > pgtcl.c:56: syntax error before `0'
> > > > > pgtcl.c:61: syntax error before `0'
> > > > > pgtcl.c:66: syntax error before `0'
> > > > > pgtcl.c:71: syntax error before `0'
> > > > > pgtcl.c:76: syntax error before `0'
> > > > > pgtcl.c:81: syntax error before `0'
> > > > > pgtcl.c:86: syntax error before `0'
> > > > > pgtcl.c:91: syntax error before `0'
> > > > > pgtcl.c:96: syntax error before `0'
> > > > > pgtcl.c:112: syntax error before `0'
> > > > > pgtcl.c:117: syntax error before `0'
> > > > > pgtcl.c:123: syntax error before `0'
> > > > > pgtcl.c:128: syntax error before `0'
> > > > > pgtcl.c:133: syntax error before `0'
> > > > > pgtcl.c:138: syntax error before `0'
> > > > > pgtcl.c:143: syntax error before `0'
> > > > > pgtcl.c:148: syntax error before `0'
> > > > > pgtcl.c:153: syntax error before `0'
> > > > > pgtcl.c:158: syntax error before `0'
> > > > > pgtcl.c:160: warning: implicit declaration of function
> > `Tcl_PkgProvide'
> > > > > pgtcl.c:162: `TCL_OK' undeclared (first use in this function)
> > > > > pgtcl.c:163: warning: control reaches end of non-void function
> > > > > pgtcl.c: At top level:
> > > > > pgtcl.c:167: syntax error before `*'
> > > > > pgtcl.c:168: warning: no previous prototype for `Pgtcl_SafeInit'
> > > > > pgtcl.c: In function `Pgtcl_SafeInit':
> > > > > pgtcl.c:169: `interp' undeclared (first use in this function)
> > > > > gmake[3]: *** [pgtcl.o] Error 1
> > > > >
> > > > > Aasmund Midttun Godal
> > > > >
> > > > > aasmund(at)godal(dot)com - http://www.godal.com/
> > > > > +47 40 45 20 46 - Elgesetergt. 26B, N-7030 Trondheim
> > > > >
> > > > > ---------------------------(end of broadcast)------------------------
> > ---
> > > > > TIP 1: subscribe and unsubscribe commands go to
> > majordomo(at)postgresql(dot)org
> > > >
> > > > Aasmund Midttun Godal
> > > >
> > > > aasmund(at)godal(dot)com - http://www.godal.com/
> > > > +47 40 45 20 46 - Elgesetergt. 26B, N-7030 Trondheim
> > > >
> > > > ---------------------------(end of broadcast)--------------------------
> > -
> > > > TIP 4: Don't 'kill -9' the postmaster
> > >
> > > --
> > > Dr. Eckhardt + Partner GmbH
> > > http://www.epgmbh.de
> > >
> > > ---------------------------(end of broadcast)---------------------------
> > > TIP 1: subscribe and unsubscribe commands go to majordomo(at)postgresql(dot)org
> > >
> >
> > Aasmund Midttun Godal
> >
> > aasmund(at)godal(dot)com - http://www.godal.com/
> > +47 40 45 20 46 - Elgesetergt. 26B, N-7030 Trondheim
> >
> > ---------------------------(end of broadcast)---------------------------
> > TIP 6: Have you searched our list archives?
> >
> > http://archives.postgresql.org
> --
> Brett Schwarz
> brett_schwarz AT yahoo.com
>
>

Aasmund Midttun Godal

aasmund(at)godal(dot)com - http://www.godal.com/
+47 40 45 20 46 - Elgesetergt. 26B, N-7030 Trondheim