Re: pgAdmin 4 v1.6 Released!

Hi Dave,

I do have pgAdmin4 v.1.3 (not v1.5) installed with
postgresql-9.6.2-3-windows-x64.exe - and it works well when started
directly from its own folder.

I suspect, that those two environments may disturb each other, but cannot
see see how.

Also:
1) when v1.6 launched from the installer it works well.
2) when v1.6 launched from a shortcut it starts v1.5.
3) When I check from program manager, both 1) and 2) run the same "pgAdmin
4\v1\runtime\pgAdmin4.exe" executable from v1.6 installation path.

I will do some checks on another PC today.

Thank you and kind regards
Pawel

On 21 July 2017 at 00:28, Dave Page <dpage(at)pgadmin(dot)org> wrote:

> You don't have the PostgreSQL installer from EDB or BigSQL on that machine
> do you? They have their own separate copies of pgAdmin.
>
> Sent from my iPad
>
> On 20 Jul 2017, at 23:53, Pawel Hadam <hadzio(at)gmail(dot)com> wrote:
>
> Thank you Dave,
>
> Full clean-up (all folders and registry) and fresh installation helps
> once. On the last screen I select to Launch pgAdmin4 and v1.6 starts
> correctly and I can use it. I need to say it is very nice.
>
> 2017-07-20 23:42:17,891: INFO pgadmin: Starting pgAdmin 4 v1.6...
>
>
> However, when I exit and launch it again, it starts again.... v1.5 in the
> server mode and the log files say the same and it still cannot connect to
> the server:
>
> 2017-07-20 23:43:56,013: INFO pgadmin: Starting pgAdmin 4 v1.5...
>
>
> Please see attached config files from C:\Program Files (x86)\pgAdmin
> 4\v1\web\
> and log files from C:\Users\pawelhadam\AppData\Roaming\pgAdmin\
>
>
> I have no idea where v1.5 is still sitting on my PC :( I must be doing
> something stupid, I am afraid.
>
>
> Thanks in advance for any more help and kind regards
> Pawel
>
>
> On 19 July 2017 at 09:12, Dave Page <dpage(at)pgadmin(dot)org> wrote:
>
>> [Narrowing the addressee list]
>>
>> Hi
>>
>> On Tue, Jul 18, 2017 at 11:14 PM, Pawel Hadam <hadzio(at)gmail(dot)com> wrote:
>>
>>> Hi Dave,
>>>
>>> Thank you for this advise.
>>>
>>> Please find attached my files:
>>>
>>> 1) C:\Users\pawelhadam\AppData\Roaming\pgAdmin\pgadmin4.log
>>>
>>> I cannot understand why this log file says "Starting pgAdmin 4 v1.5..."
>>> as I have installed v1.6 from pgadmin4-1.6-x86.exe
>>>
>>
>> That certainly screams of 'messed up installation'. It gets that number
>> from config.py.
>>
>>
>>>
>>> 2) C:\Program Files (x86)\pgAdmin 4\v1\web\config_local.py
>>>
>>
>> I'm surprised it even works with that - it looks like a direct copy of
>> config.py, and if you look at the end is basically importing itself.
>>
>> Please uninstall pgAdmin, and ensure C:\Program Files (x86)\pgAdmin 4 is
>> completely removed. I would also suggest removing %APPDATA%\pgAdmin as well
>> (note that will delete your config database so you'll have to re-add any
>> registered servers).
>>
>> Then, using regedit.exe, remove the registry key:
>> HKEY_CURRENT_USER\Software\pgadmin\pgadmin4
>>
>> Once the system is completely cleaned, try a fresh installation.
>>
>> Regards, Dave.
>>
>>
>>>
>>> Thank you and kind regards
>>> Pawel
>>>
>>>
>>> On 17 July 2017 at 09:36, Dave Page <dpage(at)pgadmin(dot)org> wrote:
>>>
>>>>
>>>>
>>>> On Fri, Jul 14, 2017 at 1:58 PM, Pawel Hadam <hadzio(at)gmail(dot)com> wrote:
>>>>
>>>>> Thank you Dave and Khushboo for advises.
>>>>>
>>>>> 1) (re)moving 'pgadmin4.db' - did not help.
>>>>>
>>>>> 2) I have disabled teredo - did not help.
>>>>>
>>>>> 3) localhost is resolved to IPv6 address:
>>>>>
>>>>> $ ping localhost
>>>>>
>>>>> Pinging ogrodowa [::1] with 32 bytes of data:
>>>>> Reply from ::1: time<1ms
>>>>> Reply from ::1: time<1ms
>>>>> Reply from ::1: time<1ms
>>>>> Reply from ::1: time<1ms
>>>>>
>>>>> 4) I DO use IPv4 as well.
>>>>>
>>>>> 5) No entries for localhost in hosts file.
>>>>>
>>>>> 6) On which address/port the server should be listening?
>>>>>
>>>>> $ netstat -a | grep LISTEN | grep "127.0.0.1"
>>>>> TCP 127.0.0.1:3212 ogrodowa:0 LISTENING
>>>>> TCP 127.0.0.1:3213 ogrodowa:0 LISTENING
>>>>> TCP 127.0.0.1:4370 ogrodowa:0 LISTENING
>>>>> TCP 127.0.0.1:4371 ogrodowa:0 LISTENING
>>>>> TCP 127.0.0.1:4380 ogrodowa:0 LISTENING
>>>>> TCP 127.0.0.1:4381 ogrodowa:0 LISTENING
>>>>> TCP 127.0.0.1:5037 ogrodowa:0 LISTENING
>>>>> TCP 127.0.0.1:9990 ogrodowa:0 LISTENING
>>>>> TCP 127.0.0.1:30000 ogrodowa:0 LISTENING
>>>>> TCP 127.0.0.1:49674 ogrodowa:0 LISTENING
>>>>>
>>>>> 7) ping to 127.0.0.1 works well:
>>>>>
>>>>> $ ping 127.0.0.1
>>>>>
>>>>> Pinging 127.0.0.1 with 32 bytes of data:
>>>>> Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
>>>>> Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
>>>>> Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
>>>>> Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
>>>>>
>>>>>
>>>>> Not sure what else I need to check...
>>>>>
>>>>
>>>> In the web/ subdirectory of the installation, you should find a file
>>>> called config.py. Please create a file called config_local.py in the same
>>>> directory, containing the following lines (excluding the ==== lines) :
>>>>
>>>> ====
>>>> from config import *
>>>>
>>>> # Debug mode
>>>> DEBUG = True
>>>>
>>>> # Log
>>>> CONSOLE_LOG_LEVEL = DEBUG
>>>> FILE_LOG_LEVEL = DEBUG
>>>> ====
>>>>
>>>> Then, try to start pgAdmin. That should create a more useful logfile in
>>>> %APPDATA%\pgAdmin to share with us.
>>>>
>>>> Thanks.
>>>>
>>>> --
>>>> Dave Page
>>>> Blog: http://pgsnake.blogspot.com
>>>> Twitter: @pgsnake
>>>>
>>>> EnterpriseDB UK: http://www.enterprisedb.com
>>>> The Enterprise PostgreSQL Company
>>>>
>>>
>>>
>>
>>
>> --
>> Dave Page
>> Blog: http://pgsnake.blogspot.com
>> Twitter: @pgsnake
>>
>> EnterpriseDB UK: http://www.enterprisedb.com
>> The Enterprise PostgreSQL Company
>>
>
> <config.py>
>
> <pgadmin4.log>
>
> <config_distro.py>
>
> <config_local.py>
>
>