Re: PgAgent Patch

On Fri, Apr 17, 2015 at 7:16 PM, Mehmet Emin KARAKAŞ <emin100(at)gmail(dot)com>
wrote:

> Hi Sanket,
>
> I test the patch on windows7 and Ubuntu 14.10. It's working fine.
>
Thanks for the patch.
I have committed this in the master branch.

Also, thanks to Akshay Joshi, Sanket Mehta for the review and improvisation
of the patch.
I have modified a bit before check-in.

--

Thanks & Regards,

Ashesh Vashi
EnterpriseDB INDIA: Enterprise PostgreSQL Company
<http://www.enterprisedb.com>

*http://www.linkedin.com/in/asheshvashi*
<http://www.linkedin.com/in/asheshvashi>

>
> 2015-04-17 12:54 GMT+03:00 Sanket Mehta <sanket(dot)mehta(at)enterprisedb(dot)com>:
>
>> Hi Mehmet,
>>
>> I have modified the patch as explained below:
>>
>> After carefully reviewing the patch, we found that there is a memory leak
>> while error file handling.
>>
>> after opening the file in write mode using freopen(), we again open the
>> same file in read mode using fopen().
>> at this time we are just opening a file without any stderr stream getting
>> redirected. So it should be closed after read operation.
>> Which was not happening before and its a memory leak.
>>
>> previously we were using the same FILE* which is used in freopen() for
>> opening the file using fopen(), so when we close the handler internally it
>> may have close the stream and thus we were not getting the std error for
>> the 2nd time.
>>
>> But now I have used another FILE* handler to open that file in read mode
>> using fopen() and closed it after read operation and it works fine.
>> Errors are getting logged in table every time properly.
>>
>> Another change is that we std errors should get logged in file every time
>> irrespective of output string is empty or not. so I have removed the
>> condition if(output == wxEmptyString) .
>>
>> I have attached the new patch here.
>> Please test and let me know if you think any changes requires.
>>
>>
>> Regards,
>> Sanket Mehta
>> Sr Software engineer
>> Enterprisedb
>>
>> On Wed, Apr 15, 2015 at 6:23 PM, Sanket Mehta <
>> sanket(dot)mehta(at)enterprisedb(dot)com> wrote:
>>
>>> Hi,
>>>
>>> I have reviewed the patch.
>>> You are right Mehmet, previously 2nd time stderr was not coming to file.
>>> With this patch that issue is resolved.
>>>
>>>
>>>
>>> Regards,
>>> Sanket Mehta
>>> Sr Software engineer
>>> Enterprisedb
>>>
>>> On Wed, Apr 15, 2015 at 3:27 PM, Mehmet Emin KARAKAŞ <emin100(at)gmail(dot)com>
>>> wrote:
>>>
>>>> Hi,
>>>>
>>>>
>>>> We are using the patch. But We make a mistake. Pgagent run the agent
>>>> first time, everything is perfect. But second batch run , pgagent is not
>>>> get stderr message. Then I have reviewed the patch. we are using "freopen"
>>>> for redirect stderr massage to file. Then we close the error file. But If
>>>> close the file, close the stderr message at the same time and I don't any
>>>> error message form stderror. So, I remove the fclose code for errorfile.
>>>> Now Every things is ok.
>>>> I make to test it on windows 7 and ubuntu 14.10. It is working fine. I
>>>> attached the patch in this mail.
>>>>
>>>> 2015-04-09 10:00 GMT+03:00 Sanket Mehta <sanket(dot)mehta(at)enterprisedb(dot)com>
>>>> :
>>>>
>>>>> Hi,
>>>>>
>>>>> I have reviewed the patch.
>>>>> It is working fine.
>>>>>
>>>>> Regards,
>>>>> Sanket Mehta
>>>>> Sr Software engineer
>>>>> Enterprisedb
>>>>>
>>>>> On Mon, Apr 6, 2015 at 7:30 PM, Mehmet Emin KARAKAŞ <emin100(at)gmail(dot)com
>>>>> > wrote:
>>>>>
>>>>>> Hi,
>>>>>>
>>>>>> What is the last situation? I want to remove my repo and continue
>>>>>> original repo.
>>>>>>
>>>>>> Thanks for everything.
>>>>>>
>>>>>>
>>>>>> 2015-03-23 10:58 GMT+02:00 Ashesh Vashi <
>>>>>> ashesh(dot)vashi(at)enterprisedb(dot)com>:
>>>>>>
>>>>>>> On Mon, Mar 23, 2015 at 2:26 PM, Mehmet Emin KARAKAŞ <
>>>>>>> emin100(at)gmail(dot)com> wrote:
>>>>>>>
>>>>>>>> I send the diff in previous mail. The name
>>>>>>>> batch_cron_error_20150323.patch. You need to something diffrent. I don't
>>>>>>>> understand.
>>>>>>>>
>>>>>>>> Oops.
>>>>>>> I missed that.
>>>>>>>
>>>>>>> When I saw the job.cpp, I thought - you sent the whole files only.
>>>>>>> Thanks for the patch.
>>>>>>>
>>>>>>> Sanket,
>>>>>>>
>>>>>>> Can you please review the patch?
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>>
>>>>>>> Thanks & Regards,
>>>>>>>
>>>>>>> Ashesh Vashi
>>>>>>> EnterpriseDB INDIA: Enterprise PostgreSQL Company
>>>>>>> <http://www.enterprisedb.com>
>>>>>>>
>>>>>>>
>>>>>>> *http://www.linkedin.com/in/asheshvashi*
>>>>>>> <http://www.linkedin.com/in/asheshvashi>
>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> 2015-03-23 10:36 GMT+02:00 Ashesh Vashi <
>>>>>>>> ashesh(dot)vashi(at)enterprisedb(dot)com>:
>>>>>>>>
>>>>>>>>> Thanks Mehmet.
>>>>>>>>> Can you please send the diff (as a patch file) instead of the
>>>>>>>>> whole file?
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>>
>>>>>>>>> Thanks & Regards,
>>>>>>>>>
>>>>>>>>> Ashesh Vashi
>>>>>>>>> EnterpriseDB INDIA: Enterprise PostgreSQL Company
>>>>>>>>> <http://www.enterprisedb.com>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> *http://www.linkedin.com/in/asheshvashi*
>>>>>>>>> <http://www.linkedin.com/in/asheshvashi>
>>>>>>>>>
>>>>>>>>> On Mon, Mar 23, 2015 at 1:54 PM, Mehmet Emin KARAKAŞ <
>>>>>>>>> emin100(at)gmail(dot)com> wrote:
>>>>>>>>>
>>>>>>>>>> Hi Ashesh,
>>>>>>>>>>
>>>>>>>>>> My test scenario is;
>>>>>>>>>>
>>>>>>>>>> "java -jar xxxx" command.
>>>>>>>>>>
>>>>>>>>>> xxx is not a file. I want to see a error message in pgadmin and
>>>>>>>>>> pga_jobsteplog table. I am waiting to "Error: Unable to access jarfile
>>>>>>>>>> xxxx" message in job log output.
>>>>>>>>>>
>>>>>>>>>> I make test the patch in windows 7 and ubuntu 14.10. In windows 7
>>>>>>>>>> not problem, perfect working. But nix system (Ubuntu 14.10) debug mode, I
>>>>>>>>>> just saw the massage in terminal. Then I added to message error file to
>>>>>>>>>> output variable.
>>>>>>>>>>
>>>>>>>>>> Now It's working perfect windows and nix systems. I attach the
>>>>>>>>>> new patch in this message.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> 2015-03-23 1:15 GMT+02:00 Mehmet Emin KARAKAŞ <emin100(at)gmail(dot)com>
>>>>>>>>>> :
>>>>>>>>>>
>>>>>>>>>>> Hi Ashesh ,
>>>>>>>>>>> Sorry for late. I have test in today and share the results
>>>>>>>>>>>
>>>>>>>>>>> 2015-03-16 10:32 GMT+02:00 Ashesh Vashi <
>>>>>>>>>>> ashesh(dot)vashi(at)enterprisedb(dot)com>:
>>>>>>>>>>>
>>>>>>>>>>>> On Mon, Mar 16, 2015 at 1:31 PM, Mehmet Emin KARAKAŞ <
>>>>>>>>>>>> emin100(at)gmail(dot)com> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>
>>>>>>>>>>>>> I have not tried the patch because last week was very run
>>>>>>>>>>>>> down. But I will try the patch in this week and I will share
>>>>>>>>>>>>> the result.
>>>>>>>>>>>>>
>>>>>>>>>>>> Thanks.
>>>>>>>>>>>> I really appreciate.
>>>>>>>>>>>>
>>>>>>>>>>>> [NOTE: Please keep the list in loop...]
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> --
>>>>>>>>>>>>
>>>>>>>>>>>> Thanks & Regards,
>>>>>>>>>>>>
>>>>>>>>>>>> Ashesh Vashi
>>>>>>>>>>>> EnterpriseDB INDIA: Enterprise PostgreSQL Company
>>>>>>>>>>>> <http://www.enterprisedb.com>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> *http://www.linkedin.com/in/asheshvashi*
>>>>>>>>>>>> <http://www.linkedin.com/in/asheshvashi>
>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> 2015-03-16 6:16 GMT+02:00 Ashesh Vashi <
>>>>>>>>>>>>> ashesh(dot)vashi(at)enterprisedb(dot)com>:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> HI Mehmet,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Do you have time to spend time for this?
>>>>>>>>>>>>>> Can you please review, and test the patch sent by Akshay?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Thanks & Regards,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Ashesh Vashi
>>>>>>>>>>>>>> EnterpriseDB INDIA: Enterprise PostgreSQL Company
>>>>>>>>>>>>>> <http://www.enterprisedb.com>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> *http://www.linkedin.com/in/asheshvashi*
>>>>>>>>>>>>>> <http://www.linkedin.com/in/asheshvashi>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Thu, Mar 5, 2015 at 3:07 PM, Akshay Joshi <
>>>>>>>>>>>>>> akshay(dot)joshi(at)enterprisedb(dot)com> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Hi Mehmet
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> I have added the logic in job.cpp file to read the error
>>>>>>>>>>>>>>> message, If batch job is failed. Attached is the patch file
>>>>>>>>>>>>>>> and job.cpp with the email.
>>>>>>>>>>>>>>> I haven't tested it because facing some difficulty in
>>>>>>>>>>>>>>> linking the project on Windows. Can you please apply the patch and test it
>>>>>>>>>>>>>>> at your end, also if you seen some modification please feel free to do it.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On Wed, Mar 4, 2015 at 4:22 PM, Akshay Joshi <
>>>>>>>>>>>>>>> akshay(dot)joshi(at)enterprisedb(dot)com> wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Sure.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> On Wed, Mar 4, 2015 at 4:20 PM, Dave Page <
>>>>>>>>>>>>>>>> dpage(at)pgadmin(dot)org> wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> On Wed, Mar 4, 2015 at 10:48 AM, Akshay Joshi <
>>>>>>>>>>>>>>>>> akshay(dot)joshi(at)enterprisedb(dot)com> wrote:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Dave,
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> On Wed, Mar 4, 2015 at 4:11 PM, Dave Page <
>>>>>>>>>>>>>>>>>> dpage(at)pgadmin(dot)org> wrote:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Mehmet may not be able to work on Windows, so one of us
>>>>>>>>>>>>>>>>>>> may have to deal with that. Did we not solve this already in PEM btw?
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Yes we have solved it in PEM, I have send the source
>>>>>>>>>>>>>>>>>> code in my previous email.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Oh, that was it? Well that code is pretty well tried and
>>>>>>>>>>>>>>>>> tested, so maybe we should just use that. Perhaps you can send Mehmet a
>>>>>>>>>>>>>>>>> patch to test on his build?
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> On Wed, Mar 4, 2015 at 10:16 AM, Akshay Joshi <
>>>>>>>>>>>>>>>>>>> akshay(dot)joshi(at)enterprisedb(dot)com> wrote:
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Hi Mehmet
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> I have reviewed the patch, but it is only for nix
>>>>>>>>>>>>>>>>>>>> machine. Can you please provide a patch where it should be fixed for
>>>>>>>>>>>>>>>>>>>> Windows as well. I have implemented the same in one of my project using
>>>>>>>>>>>>>>>>>>>> below logic which works for both windows and nix. You can tried out the
>>>>>>>>>>>>>>>>>>>> below logic
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> errFile = 'xyz.txt';
>>>>>>>>>>>>>>>>>>>> FILE *fpError = freopen(errFile.mb_str(), "w", stderr);
>>>>>>>>>>>>>>>>>>>> .... .... // If output is empty then either job did not return any output
>>>>>>>>>>>>>>>>>>>> // or job threw some error into stderr. if (output ==
>>>>>>>>>>>>>>>>>>>> wxEmptyString) { // Check script threw some error into
>>>>>>>>>>>>>>>>>>>> stderr if (fpError) { fclose(fpError); fpError = fopen(
>>>>>>>>>>>>>>>>>>>> errFile.mb_str(), "r"); if (fpError) { char buffer
>>>>>>>>>>>>>>>>>>>> [4098]; wxString errorMsg = wxEmptyString; while (!feof
>>>>>>>>>>>>>>>>>>>> (fpError)) { if (fgets(buffer, 4096, fpError) != NULL)
>>>>>>>>>>>>>>>>>>>> errorMsg += wxString(buffer, wxConvLibc); } fclose(
>>>>>>>>>>>>>>>>>>>> fpError); } } }
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> On Wed, Mar 4, 2015 at 10:41 AM, Ashesh Vashi <
>>>>>>>>>>>>>>>>>>>> ashesh(dot)vashi(at)enterprisedb(dot)com> wrote:
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Sure
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Thanks & Regards,
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Ashesh Vashi
>>>>>>>>>>>>>>>>>>>>> EnterpriseDB INDIA: Enterprise PostgreSQL Company
>>>>>>>>>>>>>>>>>>>>> <http://www.enterprisedb.com>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> *http://www.linkedin.com/in/asheshvashi*
>>>>>>>>>>>>>>>>>>>>> <http://www.linkedin.com/in/asheshvashi>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> On Tue, Mar 3, 2015 at 2:01 PM, Dave Page <
>>>>>>>>>>>>>>>>>>>>> dpage(at)pgadmin(dot)org> wrote:
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> Ashesh; can you please get this reviewed and applied
>>>>>>>>>>>>>>>>>>>>>> if it looks OK?
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> Thanks.
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> On Tue, Mar 3, 2015 at 12:00 PM, Mehmet Emin KARAKAŞ <
>>>>>>>>>>>>>>>>>>>>>> emin100(at)gmail(dot)com> wrote:
>>>>>>>>>>>>>>>>>>>>>> > Hi,
>>>>>>>>>>>>>>>>>>>>>> > If batch cron is failed, pgagent doesn't receive
>>>>>>>>>>>>>>>>>>>>>> error messages. We fix it.
>>>>>>>>>>>>>>>>>>>>>> > We canalized the stderr to stdout. This patch batch
>>>>>>>>>>>>>>>>>>>>>> cron receive error
>>>>>>>>>>>>>>>>>>>>>> > massages from nix machine. Git Diff Message and
>>>>>>>>>>>>>>>>>>>>>> job.cpp file is attached.
>>>>>>>>>>>>>>>>>>>>>> >
>>>>>>>>>>>>>>>>>>>>>> > Thanks.
>>>>>>>>>>>>>>>>>>>>>> >
>>>>>>>>>>>>>>>>>>>>>> > --
>>>>>>>>>>>>>>>>>>>>>> > MEHMET EMİN KARAKAŞ
>>>>>>>>>>>>>>>>>>>>>> > Postgresql Global Username: emin100
>>>>>>>>>>>>>>>>>>>>>> >
>>>>>>>>>>>>>>>>>>>>>> >
>>>>>>>>>>>>>>>>>>>>>> >
>>>>>>>>>>>>>>>>>>>>>> > diff --git a/job.cpp b/job.cpp
>>>>>>>>>>>>>>>>>>>>>> > index 00334ab..694be22 100644
>>>>>>>>>>>>>>>>>>>>>> > --- a/job.cpp
>>>>>>>>>>>>>>>>>>>>>> > +++ b/job.cpp
>>>>>>>>>>>>>>>>>>>>>> > @@ -273,8 +273,11 @@ int Job::Execute()
>>>>>>>>>>>>>>>>>>>>>> > // The *nix way.
>>>>>>>>>>>>>>>>>>>>>> > FILE *fp_script;
>>>>>>>>>>>>>>>>>>>>>> > char buf[4098];
>>>>>>>>>>>>>>>>>>>>>> > +
>>>>>>>>>>>>>>>>>>>>>> > + wxString wxSt = wxT("");
>>>>>>>>>>>>>>>>>>>>>> > + wxSt.Printf( _("%s 2>&1"),
>>>>>>>>>>>>>>>>>>>>>> filename.c_str());
>>>>>>>>>>>>>>>>>>>>>> >
>>>>>>>>>>>>>>>>>>>>>> > - fp_script =
>>>>>>>>>>>>>>>>>>>>>> > popen(filename.mb_str(wxConvUTF8), "r");
>>>>>>>>>>>>>>>>>>>>>> > + fp_script =
>>>>>>>>>>>>>>>>>>>>>> popen(wxSt.mb_str(wxConvUTF8) ,
>>>>>>>>>>>>>>>>>>>>>> > "r");
>>>>>>>>>>>>>>>>>>>>>> > if (!fp_script)
>>>>>>>>>>>>>>>>>>>>>> > {
>>>>>>>>>>>>>>>>>>>>>> >
>>>>>>>>>>>>>>>>>>>>>> output.Printf(_("Couldn't execute
>>>>>>>>>>>>>>>>>>>>>> > script: %s, errno = %d"), filename.c_str(), errno);
>>>>>>>>>>>>>>>>>>>>>> >
>>>>>>>>>>>>>>>>>>>>>> >
>>>>>>>>>>>>>>>>>>>>>> >
>>>>>>>>>>>>>>>>>>>>>> >
>>>>>>>>>>>>>>>>>>>>>> >
>>>>>>>>>>>>>>>>>>>>>> >
>>>>>>>>>>>>>>>>>>>>>> >
>>>>>>>>>>>>>>>>>>>>>> > --
>>>>>>>>>>>>>>>>>>>>>> > Sent via pgadmin-hackers mailing list (
>>>>>>>>>>>>>>>>>>>>>> pgadmin-hackers(at)postgresql(dot)org)
>>>>>>>>>>>>>>>>>>>>>> > To make changes to your subscription:
>>>>>>>>>>>>>>>>>>>>>> > http://www.postgresql.org/mailpref/pgadmin-hackers
>>>>>>>>>>>>>>>>>>>>>> >
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>> Dave Page
>>>>>>>>>>>>>>>>>>>>>> Blog: http://pgsnake.blogspot.com
>>>>>>>>>>>>>>>>>>>>>> Twitter: @pgsnake
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> EnterpriseDB UK: http://www.enterprisedb.com
>>>>>>>>>>>>>>>>>>>>>> The Enterprise PostgreSQL Company
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>> Sent via pgadmin-hackers mailing list (
>>>>>>>>>>>>>>>>>>>>>> pgadmin-hackers(at)postgresql(dot)org)
>>>>>>>>>>>>>>>>>>>>>> To make changes to your subscription:
>>>>>>>>>>>>>>>>>>>>>> http://www.postgresql.org/mailpref/pgadmin-hackers
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>> *Akshay Joshi*
>>>>>>>>>>>>>>>>>>>> *Principal Software Engineer *
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> *Phone: +91 20-3058-9517 <%2B91%2020-3058-9517>Mobile:
>>>>>>>>>>>>>>>>>>>> +91 976-788-8246*
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>> Dave Page
>>>>>>>>>>>>>>>>>>> Blog: http://pgsnake.blogspot.com
>>>>>>>>>>>>>>>>>>> Twitter: @pgsnake
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> EnterpriseDB UK: http://www.enterprisedb.com
>>>>>>>>>>>>>>>>>>> The Enterprise PostgreSQL Company
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>> *Akshay Joshi*
>>>>>>>>>>>>>>>>>> *Principal Software Engineer *
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> *Phone: +91 20-3058-9517 <%2B91%2020-3058-9517>Mobile:
>>>>>>>>>>>>>>>>>> +91 976-788-8246*
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>> Dave Page
>>>>>>>>>>>>>>>>> Blog: http://pgsnake.blogspot.com
>>>>>>>>>>>>>>>>> Twitter: @pgsnake
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> EnterpriseDB UK: http://www.enterprisedb.com
>>>>>>>>>>>>>>>>> The Enterprise PostgreSQL Company
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>> *Akshay Joshi*
>>>>>>>>>>>>>>>> *Principal Software Engineer *
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> *Phone: +91 20-3058-9517 <%2B91%2020-3058-9517>Mobile: +91
>>>>>>>>>>>>>>>> 976-788-8246*
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>> *Akshay Joshi*
>>>>>>>>>>>>>>> *Principal Software Engineer *
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> *Phone: +91 20-3058-9517 <%2B91%2020-3058-9517>Mobile: +91
>>>>>>>>>>>>>>> 976-788-8246*
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> --
>>>>>>>>>>>>> MEHMET EMİN KARAKAŞ
>>>>>>>>>>>>> Yazılım Uzmanı
>>>>>>>>>>>>>
>>>>>>>>>>>>> TURKSAT Uluslararası Uydu ve Kablo TV Operatörü
>>>>>>>>>>>>> Konya Yolu 40. Km. 06839 Golbasi / ANKARA - TÜRKİYE
>>>>>>>>>>>>> Tel : +90 312 615 32 73
>>>>>>>>>>>>> Faks : +90 312 615 32 77
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> --
>>>>>>>>>>> MEHMET EMİN KARAKAŞ
>>>>>>>>>>> Yazılım Uzmanı
>>>>>>>>>>>
>>>>>>>>>>> TURKSAT Uluslararası Uydu ve Kablo TV Operatörü
>>>>>>>>>>> Konya Yolu 40. Km. 06839 Golbasi / ANKARA - TÜRKİYE
>>>>>>>>>>> Tel : +90 312 615 32 73
>>>>>>>>>>> Faks : +90 312 615 32 77
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>> MEHMET EMİN KARAKAŞ
>>>>>>>>>> Yazılım Uzmanı
>>>>>>>>>>
>>>>>>>>>> TURKSAT Uluslararası Uydu ve Kablo TV Operatörü
>>>>>>>>>> Konya Yolu 40. Km. 06839 Golbasi / ANKARA - TÜRKİYE
>>>>>>>>>> Tel : +90 312 615 32 73
>>>>>>>>>> Faks : +90 312 615 32 77
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> MEHMET EMİN KARAKAŞ
>>>>>>>> Yazılım Uzmanı
>>>>>>>>
>>>>>>>> TURKSAT Uluslararası Uydu ve Kablo TV Operatörü
>>>>>>>> Konya Yolu 40. Km. 06839 Golbasi / ANKARA - TÜRKİYE
>>>>>>>> Tel : +90 312 615 32 73
>>>>>>>> Faks : +90 312 615 32 77
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> MEHMET EMİN KARAKAŞ
>>>>>> Yazılım Uzmanı
>>>>>>
>>>>>> TURKSAT Uluslararası Uydu ve Kablo TV Operatörü
>>>>>> Konya Yolu 40. Km. 06839 Golbasi / ANKARA - TÜRKİYE
>>>>>> Tel : +90 312 615 32 73
>>>>>> Faks : +90 312 615 32 77
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>> --
>>>> MEHMET EMİN KARAKAŞ
>>>> Yazılım Uzmanı
>>>>
>>>> TURKSAT Uluslararası Uydu ve Kablo TV Operatörü
>>>> Konya Yolu 40. Km. 06839 Golbasi / ANKARA - TÜRKİYE
>>>> Tel : +90 312 615 32 73
>>>> Faks : +90 312 615 32 77
>>>>
>>>
>>>
>>
>
>
> --
> MEHMET EMİN KARAKAŞ
> Yazılım Uzmanı
>
> TURKSAT Uluslararası Uydu ve Kablo TV Operatörü
> Konya Yolu 40. Km. 06839 Golbasi / ANKARA - TÜRKİYE
> Tel : +90 312 615 32 73
> Faks : +90 312 615 32 77
>