Re: Implementing Incremental View Maintenance

Aggregate operation of user-defined type cannot be specified
(commit e150d964df7e3aeb768e4bae35d15764f8abd284)

A SELECT statement using the MIN() and MAX() functions can be executed on a
user-defined type column that implements the aggregate functions MIN () and
MAX ().
However, if the same SELECT statement is specified in the AS clause of
CREATE INCREMENTAL MATERIALIZED VIEW, the following error will occur.

```
SELECT MIN(data) data_min, MAX(data) data_max FROM foo;
data_min | data_max
----------+----------
1/3 | 2/3
(1 row)

CREATE INCREMENTAL MATERIALIZED VIEW foo_min_imv AS SELECT MIN(data)
data_min FROM foo;
psql:extension-agg.sql:14: ERROR: aggregate function min is not supported
CREATE INCREMENTAL MATERIALIZED VIEW foo_max_imv AS SELECT MAX(data)
data_max FROM foo;
psql:extension-agg.sql:15: ERROR: aggregate function max is not supported
```

Does query including user-defined type aggregate operation not supported by
INCREMENTAL MATERIALIZED VIEW?

An execution example is shown below.

```
[ec2-user(at)ip-10-0-1-10 ivm]$ cat extension-agg.sql
--
-- pg_fraction: https://github.com/nuko-yokohama/pg_fraction
--
DROP EXTENSION IF EXISTS pg_fraction CASCADE;
DROP TABLE IF EXISTS foo CASCADE;

CREATE EXTENSION IF NOT EXISTS pg_fraction;
\dx
\dT+ fraction

CREATE TABLE foo (id int, data fraction);
INSERT INTO foo (id, data) VALUES (1,'2/3'),(2,'1/3'),(3,'1/2');
SELECT MIN(data) data_min, MAX(data) data_max FROM foo;
CREATE INCREMENTAL MATERIALIZED VIEW foo_min_imv AS SELECT MIN(data)
data_min FROM foo;
CREATE INCREMENTAL MATERIALIZED VIEW foo_max_imv AS SELECT MAX(data)
data_max FROM foo;

SELECT MIN(id) id_min, MAX(id) id_max FROM foo;
CREATE INCREMENTAL MATERIALIZED VIEW foo_id_imv AS SELECT MIN(id) id_min,
MAX(id) id_max FROM foo;
```

Best regards.

2018年12月27日(木) 21:57 Yugo Nagata <nagata(at)sraoss(dot)co(dot)jp>:

> Hi,
>
> I would like to implement Incremental View Maintenance (IVM) on
> PostgreSQL.
> IVM is a technique to maintain materialized views which computes and
> applies
> only the incremental changes to the materialized views rather than
> recomputate the contents as the current REFRESH command does.
>
> I had a presentation on our PoC implementation of IVM at PGConf.eu 2018
> [1].
> Our implementation uses row OIDs to compute deltas for materialized
> views.
> The basic idea is that if we have information about which rows in base
> tables
> are contributing to generate a certain row in a matview then we can
> identify
> the affected rows when a base table is updated. This is based on an idea of
> Dr. Masunaga [2] who is a member of our group and inspired from ID-based
> approach[3].
>
> In our implementation, the mapping of the row OIDs of the materialized view
> and the base tables are stored in "OID map". When a base relation is
> modified,
> AFTER trigger is executed and the delta is recorded in delta tables using
> the transition table feature. The accual udpate of the matview is triggerd
> by REFRESH command with INCREMENTALLY option.
>
> However, we realize problems of our implementation. First, WITH OIDS will
> be removed since PG12, so OIDs are no longer available. Besides this, it
> would
> be hard to implement this since it needs many changes of executor nodes to
> collect base tables's OIDs during execuing a query. Also, the cost of
> maintaining
> OID map would be high.
>
> For these reasons, we started to think to implement IVM without relying on
> OIDs
> and made a bit more surveys.
>
> We also looked at Kevin Grittner's discussion [4] on incremental matview
> maintenance. In this discussion, Kevin proposed to use counting algorithm
> [5]
> to handle projection views (using DISTNICT) properly. This algorithm need
> an
> additional system column, count_t, in materialized views and delta tables
> of
> base tables.
>
> However, the discussion about IVM is now stoped, so we would like to
> restart and
> progress this.
>
>
> Through our PoC inplementation and surveys, I think we need to think at
> least
> the followings for implementing IVM.
>
> 1. How to extract changes on base tables
>
> I think there would be at least two approaches for it.
>
> - Using transition table in AFTER triggers
> - Extracting changes from WAL using logical decoding
>
> In our PoC implementation, we used AFTER trigger and transition tables,
> but using
> logical decoding might be better from the point of performance of base
> table
> modification.
>
> If we can represent a change of UPDATE on a base table as query-like
> rather than
> OLD and NEW, it may be possible to update the materialized view directly
> instead
> of performing delete & insert.
>
>
> 2. How to compute the delta to be applied to materialized views
>
> Essentially, IVM is based on relational algebra. Theorically, changes on
> base
> tables are represented as deltas on this, like "R <- R + dR", and the
> delta on
> the materialized view is computed using base table deltas based on "change
> propagation equations". For implementation, we have to derive the
> equation from
> the view definition query (Query tree, or Plan tree?) and describe this as
> SQL
> query to compulte delta to be applied to the materialized view.
>
> There could be several operations for view definition: selection,
> projection,
> join, aggregation, union, difference, intersection, etc. If we can
> prepare a
> module for each operation, it makes IVM extensable, so we can start a
> simple
> view definition, and then support more complex views.
>
>
> 3. How to identify rows to be modifed in materialized views
>
> When applying the delta to the materialized view, we have to identify
> which row
> in the matview is corresponding to a row in the delta. A naive method is
> matching
> by using all columns in a tuple, but clearly this is unefficient. If
> thematerialized
> view has unique index, we can use this. Maybe, we have to force
> materialized views
> to have all primary key colums in their base tables. In our PoC
> implementation, we
> used OID to identify rows, but this will be no longer available as said
> above.
>
>
> 4. When to maintain materialized views
>
> There are two candidates of the timing of maintenance, immediate (eager)
> or deferred.
>
> In eager maintenance, the materialized view is updated in the same
> transaction
> where the base table is updated. In deferred maintenance, this is done
> after the
> transaction is commited, for example, when view is accessed, as a response
> to user
> request, etc.
>
> In the previous discussion[4], it is planned to start from "eager"
> approach. In our PoC
> implementaion, we used the other aproach, that is, using REFRESH command
> to perform IVM.
> I am not sure which is better as a start point, but I begin to think that
> the eager
> approach may be more simple since we don't have to maintain base table
> changes in other
> past transactions.
>
> In the eager maintenance approache, we have to consider a race condition
> where two
> different transactions change base tables simultaneously as discussed in
> [4].
>
>
> [1]
> https://www.postgresql.eu/events/pgconfeu2018/schedule/session/2195-implementing-incremental-view-maintenance-on-postgresql/
> [2]
> https://ipsj.ixsq.nii.ac.jp/ej/index.php?active_action=repository_view_main_item_detail&page_id=13&block_id=8&item_id=191254&item_no=1
> (Japanese only)
> [3] https://dl.acm.org/citation.cfm?id=2750546
> [4]
> https://www.postgresql.org/message-id/flat/1368561126.64093.YahooMailNeo%40web162904.mail.bf1.yahoo.com
> [5] https://dl.acm.org/citation.cfm?id=170066
>
> Regards,
> --
> Yugo Nagata <nagata(at)sraoss(dot)co(dot)jp>
>
>