Quick Links

Re: Problem about connecting PostgreSQL through TCP/IP

From:	Hui Chen <gray(dot)chenhui(at)gmail(dot)com>
To:	shadowbox <percy(dot)deleon(at)gmail(dot)com>
Cc:	pgsql-php(at)postgresql(dot)org
Subject:	Re: Problem about connecting PostgreSQL through TCP/IP
Date:	2005-08-17 15:32:26
Message-ID:	923c3c14050817083231e4870@mail.gmail.com
Views:	Raw Message \| Whole Thread \| Download mbox \| Resend email
Thread:
Lists:	pgsql-php

Hello,

Very good point. But did configure the PHP with pgsql support. In
fact, I can successfully connect the postgresql server over
UNIX-domain socket, e.g., this code below uses the UNIX-domain socket
since I do not have include "host" and "port" in "pg_connect" function
call,
<?php
$conn = pg_connect("dbname=foodb user=foo password=foo") or die
("Can not connect to postgres");
$result=pg_exec("SELECT * FROM footbl");
$fetch = pg_fetch_row($result);
print "<html><body>";
print $fetch[0];
print "<body></html>";
pg_close($conn); // Close this connection
?>
This code produced the expected result. However, when "host" and
"port" were given, the connection failed. What I can conclude is,
1) PHP was successfully configured with postgresql support. PHP
connected the database server UNIX-domain socket without any problem;
However, PHP could not establish connection with the database server
over TCP/IP
2) It seemed the database server accepted TCP/IP connection since I
could locate an entry in the database log file when a telnet attempt
at port 5432 was issued.
3) PHP did not pass the connection to the database at all because I
did not see any entry for the failed connection in the database log
file.
Am I getting it correctly? How should I do?

Thanks a lot!

Gray

On 8/17/05, shadowbox <percy(dot)deleon(at)gmail(dot)com> wrote:
> did you configure your PHP with pgsql support?
>
> On 8/17/05, Hui Chen <gray(dot)chenhui(at)gmail(dot)com> wrote:
> > Hello,
> >
> > Thanks a lot!
> >
> > I did noticed "-i" option. I am using 8.0 whose manual
> > (http://www.postgresql.org/docs/8.0/interactive/app-postmaster.html)
> > states that "-i" option is deprecated. The manual
> > (http://www.postgresql.org/docs/8.0/interactive/runtime-config.html#RUNTIME-CONFIG-CONNECTION)
> > also says that I can enable "listen_addresses" option in the
> > postgresql.conf to enable the server to listen over TCP/IP. What
> > really puzzles me is that I could actually telnet server at 5432 ports
> > and saw an corresponding entry in the log file; however, when I used
> > PHP to connect the server, the log file did not have an entry for the
> > failed connection attempt at all. Do you think what can go wrong?
> > Thanks!
> >
> > Gray
> >
> >
> > On 8/15/05, operationsengineer1(at)yahoo(dot)com <operationsengineer1(at)yahoo(dot)com> wrote:
> > > did you enable the "i" flag when you started the
> > > postmaster? if you didn't do that, tcp/ip will not
> > > connect!
> > >
> > > http://www.postgresql.org/docs/7.4/interactive/app-postmaster.html
> > >
> > > good luck.
> > >
> > > --- Hui Chen <gray(dot)chenhui(at)gmail(dot)com> wrote:
> > >
> > > > Hello, everyone,
> > > >
> > > > Can anyone help me? I am quite frustrating now. I
> > > > have been trying to
> > > > connect PostgreSQL server through TCP/IP connection
> > > > using PHP. I was
> > > > not successful. Could please read the following and
> > > > give me some
> > > > hints. Thanks a million.
> > > >
> > > > OS: Fedora Core 4 ("uname -s -r" yields "Linux
> > > > 2.6.12-1.1398_FC4smp")
> > > > PostgreSQL: version 8.0.3
> > > > PHP: version 5.0.4
> > > >
> > > > In postgresql.conf, these three lines were inserted,
> > > >
> > > > listen_addresses = '*'
> > > > port = 5432
> > > > max_connections = 100
> > > >
> > > > The following lines were inserted to pg_hba.conf:
> > > > local all all
> > > > password
> > > > host all all 127.0.0.1/32
> > > > password
> > > > host all all 192.168.0.0/1
> > > > password
> > > >
> > > > restart posgresql by
> > > > /sbin/service postgresql restart
> > > > The server was restarted OK.
> > > >
> > > > The PHP script used to connect database is as
> > > > follows,
> > > > <?php
> > > > $conn = pg_connect("host=localhost port=5432
> > > > dbname=foodb user=foo
> > > > password=foo") or die ("Can not connect to
> > > > postgres");
> > > > $result=pg_exec("SELECT * FROM footbl");
> > > > $fetch = pg_fetch_row($result);
> > > > print "<html><body>";
> > > > print $fetch[0];
> > > > print "<body></html>";
> > > >
> > > > pg_close($conn); // Close this connection
> > > > ?>
> > > >
> > > > Assume this PHP script is named as "connectdb.php",
> > > > then on
> > > > commandline, when I run the following,
> > > > php connectedb.php
> > > > I see correct results, e.g.,
> > > > <html><body>foo<body></html>
> > > >
> > > > On commandline again, I used the following to
> > > > connect database,
> > > > psql -d foodb -h localhost -p 5432 -U foo
> > > > Password: ************
> > > > Welcome to psql 8.0.3, the PostgreSQL interactive
> > > > terminal.
> > > >
> > > > Type: \copyright for distribution terms
> > > > \h for help with SQL commands
> > > > \? for help with psql commands
> > > > \g or terminate with semicolon to execute
> > > > query
> > > > \q to quit
> > > >
> > > > foodb=>
> > > >
> > > > It is OK. Then I disabled "iptables" temporarily for
> > > > testing purpose by
> > > > /sbin/service iptables stop
> > > > Flushing firewall rules:
> > > > [ OK ]
> > > > Setting chains to policy ACCEPT: filter
> > > > [ OK ]
> > > > Unloading iptables modules:
> > > > [ OK ]
> > > >
> > > > On localhost, I tried this command,
> > > > telnet localhost 5432
> > > > after hit "enters", telnet exited. I checked
> > > > postgresql_%S.log and see
> > > > "LOG: invalid length of startup packet"
> > > > which means postgresql server indeed saw the telnet
> > > > connection.
> > > >
> > > > I tried this on any of my other machines in the LAN,
> > > > I observed the same thing.
> > > >
> > > > In summary, it seemed the postgresql allowed TCP/IP
> > > > connection, and
> > > > worked well. However, when I ran the PHP script
> > > > through web browser, I
> > > > did not get connection. Instead, in Apache web
> > > > server's error_log, I
> > > > see
> > > > [client 192.168.1.10] PHP Warning: pg_connect() [<a
> > > > href='function.pg-connect'>function.pg-connect</a>]:
> > > > Unable to connect
> > > > to PostgreSQL server: could not connect to server:
> > > > Permission
> > > > denied\n\tIs the server running on host
> > > > "localhost" and
> > > > accepting\n\tTCP/IP connections on port 5432? in
> > > > /foo/connectdb.php on
> > > > line 2
> > > >
> > > > Interestingly, when I checked the log file for
> > > > postgresql again, it
> > > > did not have anything for this connection failure.
> > > > It seemed the
> > > > connection did not send to the database server at
> > > > all. However,
> > > > 1) I disabled firewall
> > > > 2) I can telnet the ports
> > > > 3) I can run the script from commandline
> > > >
> > > > What could go wrong?
> > > >
> > > > Thanks a lot for your reading this lengthy email.
> > > > Waiting for your help!
> > > >
> > > > Gray
> > > >
> > > > ---------------------------(end of
> > > > broadcast)---------------------------
> > > > TIP 4: Have you searched our list archives?
> > > >
> > > > http://archives.postgresql.org
> > > >
> > >
> > >
> > > __________________________________________________
> > > Do You Yahoo!?
> > > Tired of spam? Yahoo! Mail has the best spam protection around
> > > http://mail.yahoo.com
> > >
> >
> > ---------------------------(end of broadcast)---------------------------
> > TIP 2: Don't 'kill -9' the postmaster
> >
>

In response to

Re: Problem about connecting PostgreSQL through TCP/IP at 2005-08-17 05:03:38 from Hui Chen

Responses

Re: Problem about connecting PostgreSQL through TCP/IP at 2005-08-17 16:31:27 from David Rogers

Browse pgsql-php by date

	From	Date	Subject
Next Message	Hui Chen	2005-08-17 15:33:50	Re: Problem about connecting PostgreSQL through TCP/IP
Previous Message	Matthew Terenzio	2005-08-17 11:06:40	Re: Problem about connecting PostgreSQL through TCP/IP