8.3 beta FATAL: invalid value for parameter "timezone_abbreviations": "Default"

folks

i've installed 8.3beta but at start up receive

FATAL: invalid value for parameter
"timezone_abbreviations": "Default"

any clue?
best regards.
MDC

info:

Linux richelet-internet 2.6.21.6 #9 SMP Sun Dec 2
17:52:20 ART 2007 i686 Pentium III (Coppermine)
GenuineIntel GNU/Linux

gp_config

BINDIR = /usr/bin
DOCDIR = /usr/doc
INCLUDEDIR = /usr/include
PKGINCLUDEDIR = /usr/include
INCLUDEDIR-SERVER = /usr/include/server
LIBDIR = /usr/lib
PKGLIBDIR = /usr/lib
LOCALEDIR =
MANDIR = /usr/man
SHAREDIR = /usr/share
SYSCONFDIR = /usr/etc
PGXS = /usr/lib/pgxs/src/makefiles/pgxs.mk
CONFIGURE =
CC = gcc
CPPFLAGS = -D_GNU_SOURCE
CFLAGS = -O2 -Wall -Wmissing-prototypes
-Wpointer-arith -Winline -Wdeclaration-after-statement
-Wendif-labels -fno-strict-aliasing
CFLAGS_SL = -fpic
LDFLAGS = -Wl,-rpath,'/usr/local/pgsql/lib'
LDFLAGS_SL =
LIBS = -lpgport -lz -lreadline -lcrypt -ldl -lm
VERSION = PostgreSQL 8.3beta3

postgresql.conf
# -----------------------------
# PostgreSQL configuration file
# -----------------------------
#
# This file consists of lines of the form:
#
# name = value
#
# (The '=' is optional.) White space may be used.
Comments are introduced
# with '#' anywhere on a line. The complete list of
option names and
# allowed values can be found in the PostgreSQL
documentation. The
# commented-out settings shown in this file represent
the default values.
#
# Please note that re-commenting a setting is NOT
sufficient to revert it
# to the default value, unless you restart the server.
#
# Any option can also be given as a command line
switch to the server,
# e.g., 'postgres -c log_connections=on'. Some
options can be changed at
# run-time with the 'SET' SQL command.
#
# This file is read on server startup and when the
server receives a
# SIGHUP. If you edit the file on a running system,
you have to SIGHUP the
# server for the changes to take effect, or use
"pg_ctl reload". Some
# settings, which are marked below, require a server
shutdown and restart
# to take effect.
#
# Memory units: kB = kilobytes MB = megabytes GB =
gigabytes
# Time units: ms = milliseconds s = seconds min =
minutes h = hours d = days

#---------------------------------------------------------------------------
# FILE LOCATIONS
#---------------------------------------------------------------------------

# The default values of these variables are driven
from the -D command line
# switch or PGDATA environment variable, represented
here as ConfigDir.

#data_directory = 'ConfigDir' # use data in another
directory
# (change requires restart)
#hba_file = 'ConfigDir/pg_hba.conf' # host-based
authentication file
# (change requires restart)
#ident_file = 'ConfigDir/pg_ident.conf' # ident
configuration file
# (change requires restart)

# If external_pid_file is not explicitly set, no extra
PID file is written.
#external_pid_file = '(none)' # write an extra PID
file
# (change requires restart)

#---------------------------------------------------------------------------
# CONNECTIONS AND AUTHENTICATION
#---------------------------------------------------------------------------

# - Connection Settings -

listen_addresses = '*' # what IP address(es) to
listen on;
# comma-separated list of addresses;
# defaults to 'localhost', '*' = all
# (change requires restart)
#port = 5432 # (change requires restart)
max_connections = 100 # (change requires restart)
# Note: increasing max_connections costs ~400 bytes of
shared memory per
# connection slot, plus lock space (see
max_locks_per_transaction). You
# might also need to raise shared_buffers to support
more connections.
#superuser_reserved_connections = 3 # (change requires
restart)
#unix_socket_directory = '' # (change requires
restart)
#unix_socket_group = '' # (change requires restart)
#unix_socket_permissions = 0777 # octal
# (change requires restart)
#bonjour_name = '' # defaults to the computer name
# (change requires restart)

# - Security & Authentication -

#authentication_timeout = 1min # 1s-600s
#ssl = off # (change requires restart)
#ssl_ciphers = 'ALL:!ADH:!LOW:!EXP:!MD5:@STRENGTH' #
Allowed SSL ciphers
# (change requires restart)
#password_encryption = on
#db_user_namespace = off

# Kerberos and GSSAPI
#krb_server_keyfile = '' # (change requires restart)
#krb_srvname = 'postgres' # (change requires restart,
kerberos only)
#krb_server_hostname = '' # empty string matches any
keytab entry
# (change requires restart, kerberos only)
#krb_caseins_users = off # (change requires restart)
#krb_realm = '' # (change requires
restart)

# - TCP Keepalives -
# see 'man 7 tcp' for details

#tcp_keepalives_idle = 0 # TCP_KEEPIDLE, in seconds;
# 0 selects the system default
#tcp_keepalives_interval = 0 # TCP_KEEPINTVL, in
seconds;
# 0 selects the system default
#tcp_keepalives_count = 0 # TCP_KEEPCNT;
# 0 selects the system default

#---------------------------------------------------------------------------
# RESOURCE USAGE (except WAL)
#---------------------------------------------------------------------------

# - Memory -

shared_buffers = 24MB # min 128kB or
max_connections*16kB
# (change requires restart)
#temp_buffers = 8MB # min 800kB
#max_prepared_transactions = 5 # can be 0 or more
# (change requires restart)
# Note: increasing max_prepared_transactions costs
~600 bytes of shared memory
# per transaction slot, plus lock space (see
max_locks_per_transaction).
#work_mem = 1MB # min 64kB
#maintenance_work_mem = 16MB # min 1MB
#max_stack_depth = 2MB # min 100kB

# - Free Space Map -

max_fsm_pages = 153600 # min max_fsm_relations*16, 6
bytes each
# (change requires restart)
#max_fsm_relations = 1000 # min 100, ~70 bytes each
# (change requires restart)

# - Kernel Resource Usage -

#max_files_per_process = 1000 # min 25
# (change requires restart)
#shared_preload_libraries = '' # (change requires
restart)

# - Cost-Based Vacuum Delay -

#vacuum_cost_delay = 0 # 0-1000 milliseconds
#vacuum_cost_page_hit = 1 # 0-10000 credits
#vacuum_cost_page_miss = 10 # 0-10000 credits
#vacuum_cost_page_dirty = 20 # 0-10000 credits
#vacuum_cost_limit = 200 # 0-10000 credits

# - Background writer -

#bgwriter_delay = 200ms # 10-10000ms between rounds
#bgwriter_lru_maxpages = 100 # 0-1000 max buffers
written/round
#bgwriter_lru_multiplier = 2.0 # 0-10.0 multipler on
buffers scanned/round

#---------------------------------------------------------------------------
# WRITE AHEAD LOG
#---------------------------------------------------------------------------

# - Settings -

#fsync = on # turns forced synchronization on or
off
#synchronous_commit = on # immediate fsync at commit
#wal_sync_method = fsync # the default is the first
option
# supported by the operating system:
# open_datasync
# fdatasync
# fsync
# fsync_writethrough
# open_sync
#full_page_writes = on # recover from partial page
writes
#wal_buffers = 64kB # min 32kB
# (change requires restart)
#wal_writer_delay = 200ms # range 1-10000, in
milliseconds

#commit_delay = 0 # range 0-100000, in microseconds
#commit_siblings = 5 # range 1-1000

# - Checkpoints -

#checkpoint_segments = 3 # in logfile segments, min
1, 16MB each
#checkpoint_timeout = 5min # range 30s-1h
#checkpoint_completion_target = 0.5 # checkpoint
target duration, 0.0 - 1.0
#checkpoint_warning = 30s # 0 is off

# - Archiving -

#archive_mode = off # allows archiving to be done
# (change requires restart)
#archive_command = '' # command to use to archive a
logfile segment
#archive_timeout = 0 # force a logfile segment switch
after this
# many seconds; 0 is off

#---------------------------------------------------------------------------
# QUERY TUNING
#---------------------------------------------------------------------------

# - Planner Method Configuration -

#enable_bitmapscan = on
#enable_hashagg = on
#enable_hashjoin = on
#enable_indexscan = on
#enable_mergejoin = on
#enable_nestloop = on
#enable_seqscan = on
#enable_sort = on
#enable_tidscan = on

# - Planner Cost Constants -

#seq_page_cost = 1.0 # measured on an arbitrary
scale
#random_page_cost = 4.0 # same scale as above
#cpu_tuple_cost = 0.01 # same scale as above
#cpu_index_tuple_cost = 0.005 # same scale as above
#cpu_operator_cost = 0.0025 # same scale as above
#effective_cache_size = 128MB

# - Genetic Query Optimizer -

#geqo = on
#geqo_threshold = 12
#geqo_effort = 5 # range 1-10
#geqo_pool_size = 0 # selects default based on
effort
#geqo_generations = 0 # selects default based on
effort
#geqo_selection_bias = 2.0 # range 1.5-2.0

# - Other Planner Options -

#default_statistics_target = 10 # range 1-1000
#constraint_exclusion = off
#from_collapse_limit = 8
#join_collapse_limit = 8 # 1 disables collapsing of
explicit
# JOINs

#---------------------------------------------------------------------------
# ERROR REPORTING AND LOGGING
#---------------------------------------------------------------------------

# - Where to Log -

#log_destination = 'stderr' # Valid values are
combinations of
# stderr, csvlog, syslog and eventlog,
# depending on platform.
# csvlog requires logging_collector to be on

# This is used when logging to stderr:
#logging_collector = off # Enable capturing of stderr
and csvlog
# into log files. Required to be on for csvlogs.
# (change requires restart)

# These are only used if logging_collector is on:
#log_directory = 'pg_log' # Directory where log files
are written
# Can be absolute or relative to PGDATA
#log_filename = 'postgresql-%Y-%m-%d_%H%M%S.log' # Log
file name pattern.
# Can include strftime() escapes
#log_truncate_on_rotation = off # If on, any existing
log file of the same
# name as the new log file will be
# truncated rather than appended to. But
# such truncation only occurs on
# time-driven rotation, not on restarts
# or size-driven rotation. Default is
# off, meaning append to existing files
# in all cases.
#log_rotation_age = 1d # Automatic rotation of
logfiles will
# happen after that time. 0 to
# disable.
#log_rotation_size = 10MB # Automatic rotation of
logfiles will
# happen after that much log
# output. 0 to disable.

# These are relevant when logging to syslog:
#syslog_facility = 'LOCAL0'
#syslog_ident = 'postgres'

# - When to Log -

#client_min_messages = notice # Values in order of
decreasing detail:
# debug5
# debug4
# debug3
# debug2
# debug1
# log
# notice
# warning
# error

#log_min_messages = notice # Values in order of
decreasing detail:
# debug5
# debug4
# debug3
# debug2
# debug1
# info
# notice
# warning
# error
# log
# fatal
# panic

#log_error_verbosity = default # terse, default, or
verbose messages

#log_min_error_statement = error # Values in order of
decreasing detail:
# debug5
# debug4
# debug3
# debug2
# debug1
# info
# notice
# warning
# error
# log
# fatal
# panic (effectively off)

#log_min_duration_statement = -1 # -1 is disabled, 0
logs all statements
# and their durations, > 0 logs only
# statements running at least N msec.

#silent_mode = off # DO NOT USE without syslog or
# logging_collector
# (change requires restart)

# - What to Log -

#debug_print_parse = off
#debug_print_rewritten = off
#debug_print_plan = off
#debug_pretty_print = off
#log_checkpoints = off
#log_connections = off
#log_disconnections = off
#log_duration = off
#log_hostname = off
#log_line_prefix = '' # Special values:
# %u = user name
# %d = database name
# %r = remote host and port
# %h = remote host
# %p = PID
# %t = timestamp (no milliseconds)
# %m = timestamp with milliseconds
# %i = command tag
# %c = session id
# %l = session line number
# %s = session start timestamp
# %v = virtual transaction id
# %x = transaction id (0 if none)
# %q = stop here in non-session
# processes
# %% = '%'
# e.g. '<%u%%%d> '
#log_lock_waits = off # Log lock waits >=
deadlock_timeout
#log_statement = 'none' # none, ddl, mod, all
#log_temp_files = -1 # Log temporary files equal or
larger
# than specified number of kilobytes.
# -1 disables; 0 logs all temp files
#log_timezone = unknown # actually, defaults to TZ
# environment setting

#---------------------------------------------------------------------------
# RUNTIME STATISTICS
#---------------------------------------------------------------------------

# - Query/Index Statistics Collector -

#track_activities = on
#track_counts = on
#update_process_title = on

# - Statistics Monitoring -

#log_parser_stats = off
#log_planner_stats = off
#log_executor_stats = off
#log_statement_stats = off

#---------------------------------------------------------------------------
# AUTOVACUUM PARAMETERS
#---------------------------------------------------------------------------

#autovacuum = on # enable autovacuum subprocess?
# 'on' requires track_counts
# to also be on
#log_autovacuum_min_duration = -1 # -1 disables, 0
logs all actions
# and their durations, > 0 logs only
# actions running at least N msec.
#autovacuum_max_workers = 3 # max # of autovacuum
subprocesses
#autovacuum_naptime = 1min # time between autovacuum
runs
#autovacuum_vacuum_threshold = 50 # min # of tuple
updates before
# vacuum
#autovacuum_analyze_threshold = 50 # min # of tuple
updates before
# analyze
#autovacuum_vacuum_scale_factor = 0.2 # fraction of
rel size before
# vacuum
#autovacuum_analyze_scale_factor = 0.1 # fraction of
rel size before
# analyze
#autovacuum_freeze_max_age = 200000000 # maximum XID
age before forced vacuum
# (change requires restart)
#autovacuum_vacuum_cost_delay = 20 # default vacuum
cost delay for
# autovacuum, -1 means use
# vacuum_cost_delay
#autovacuum_vacuum_cost_limit = -1 # default vacuum
cost limit for
# autovacuum, -1 means use
# vacuum_cost_limit

#---------------------------------------------------------------------------
# CLIENT CONNECTION DEFAULTS
#---------------------------------------------------------------------------

# - Statement Behavior -

#search_path = '"$user",public' # schema names
#default_tablespace = '' # a tablespace name, '' uses
# the default
#temp_tablespaces = '' # a list of tablespace names,
# '' uses only default tablespace
#check_function_bodies = on
#default_transaction_isolation = 'read committed'
#default_transaction_read_only = off
#statement_timeout = 0 # 0 is disabled
#session_replication_role = "origin"
#vacuum_freeze_min_age = 100000000
#xmlbinary = 'base64'
#xmloption = 'content'

# - Locale and Formatting -

datestyle = 'iso, dmy'
#timezone = unknown # actually, defaults to TZ
# environment setting
#timezone_abbreviations # select the
set of available timezone
# abbreviations. Currently, there are
# Default
# Australia
# India
# However you can also create your own
# file in share/timezonesets/.
#extra_float_digits = 0 # min -15, max 2
#client_encoding = sql_ascii # actually, defaults to
database
# encoding

# These settings are initialized by initdb -- they
might be changed
lc_messages = 'es_AR' # locale for system error
message
# strings
lc_monetary = 'es_AR' # locale for monetary
formatting
lc_numeric = 'es_AR' # locale for number formatting
lc_time = 'es_AR' # locale for time formatting

# default configuration for text search
default_text_search_config = 'pg_catalog.spanish'

# - Other Defaults -

#explain_pretty_print = on
#dynamic_library_path = '$libdir'
#local_preload_libraries = ''

#---------------------------------------------------------------------------
# LOCK MANAGEMENT
#---------------------------------------------------------------------------

#deadlock_timeout = 1s
#max_locks_per_transaction = 64 # min 10
# (change requires restart)
# Note: each lock table slot uses ~270 bytes of shared
memory, and there are
# max_locks_per_transaction * (max_connections +
max_prepared_transactions)
# lock table slots.

#---------------------------------------------------------------------------
# VERSION/PLATFORM COMPATIBILITY
#---------------------------------------------------------------------------

# - Previous Postgres Versions -

#add_missing_from = off
#array_nulls = on
#backslash_quote = safe_encoding # on, off, or
safe_encoding
#default_with_oids = off
escape_string_warning = on
standard_conforming_strings = off
#regex_flavor = advanced # advanced, extended, or
basic
#sql_inheritance = on

# - Other Platforms & Clients -

#transform_null_equals = off

#---------------------------------------------------------------------------
# CUSTOMIZED OPTIONS
#---------------------------------------------------------------------------

#custom_variable_classes = '' # list of custom
variable class names

Tarjeta de crédito Yahoo! de Banco Supervielle.
Solicitá tu nueva Tarjeta de crédito. De tu PC directo a tu casa. www.tuprimeratarjeta.com.ar