Re: How to improve db performance with $7K?

Steve Poe wrote:

> If SATA drives don't have the ability to replace SCSI for a multi-user

I don't think it is a matter of not having the ability. SATA all in all
is fine as long as
it is battery backed. It isn't as high performing as SCSI but who says
it has to be?

There are plenty of companies running databases on SATA without issue. Would
I put it on a database that is expecting to have 500 connections at all
times? No.
Then again, if you have an application with that requirement, you have
the money
to buy a big fat SCSI array.

Sincerely,

Joshua D. Drake

> Postgres apps, but you needed to save on cost (ALWAYS an issue),
> could/would you implement SATA for your logs (pg_xlog) and keep the
> rest on SCSI?
>
> Steve Poe
>
> Mohan, Ross wrote:
>
>> I've been doing some reading up on this, trying to keep up here, and
>> have found out that (experts, just yawn and cover your ears)
>>
>> 1) some SATA drives (just type II, I think?) have a "Phase Zero"
>> implementation of Tagged Command Queueing (the special sauce
>> for SCSI).
>> 2) This SATA "TCQ" is called NCQ and I believe it basically
>> allows the disk software itself to do the reordering
>> (this is called "simple" in TCQ terminology) It does not
>> yet allow the TCQ "head of queue" command, allowing the
>> current tagged request to go to head of queue, which is
>> a simple way of manifesting a "high priority" request.
>>
>> 3) SATA drives are not yet multi-initiator?
>>
>> Largely b/c of 2 and 3, multi-initiator SCSI RAID'ed drives
>> are likely to whomp SATA II drives for a while yet (read: a
>> year or two) in multiuser PostGres applications.
>>
>>
>> -----Original Message-----
>> From: pgsql-performance-owner(at)postgresql(dot)org
>> [mailto:pgsql-performance-owner(at)postgresql(dot)org] On Behalf Of Greg Stark
>> Sent: Thursday, April 14, 2005 2:04 PM
>> To: Kevin Brown
>> Cc: pgsql-performance(at)postgresql(dot)org
>> Subject: Re: [PERFORM] How to improve db performance with $7K?
>>
>>
>> Kevin Brown <kevin(at)sysexperts(dot)com> writes:
>>
>>
>>
>>> Greg Stark wrote:
>>>
>>>
>>>
>>>
>>>> I think you're being misled by analyzing the write case.
>>>>
>>>> Consider the read case. When a user process requests a block and
>>>> that read makes its way down to the driver level, the driver can't
>>>> just put it aside and wait until it's convenient. It has to go
>>>> ahead and issue the read right away.
>>>>
>>>
>>> Well, strictly speaking it doesn't *have* to. It could delay for a
>>> couple of milliseconds to see if other requests come in, and then
>>> issue the read if none do. If there are already other requests
>>> being fulfilled, then it'll schedule the request in question just
>>> like the rest.
>>>
>>
>>
>> But then the cure is worse than the disease. You're basically
>> describing exactly what does happen anyways, only you're delaying
>> more requests than necessary. That intervening time isn't really
>> idle, it's filled with all the requests that were delayed during the
>> previous large seek...
>>
>>
>>
>>> Once the first request has been fulfilled, the driver can now
>>> schedule the rest of the queued-up requests in disk-layout order.
>>>
>>> I really don't see how this is any different between a system that
>>> has tagged queueing to the disks and one that doesn't. The only
>>> difference is where the queueing happens.
>>>
>>
>>
>> And *when* it happens. Instead of being able to issue requests while
>> a large seek is happening and having some of them satisfied they have
>> to wait until that seek is finished and get acted on during the next
>> large seek.
>>
>> If my theory is correct then I would expect bandwidth to be
>> essentially equivalent but the latency on SATA drives to be increased
>> by about 50% of the average seek time. Ie, while a busy SCSI drive
>> can satisfy most requests in about 10ms a busy SATA drive would
>> satisfy most requests in 15ms. (add to that that 10k RPM and 15kRPM
>> SCSI drives have even lower seek times and no such IDE/SATA drives
>> exist...)
>>
>> In reality higher latency feeds into a system feedback loop causing
>> your application to run slower causing bandwidth demands to be lower
>> as well. It's often hard to distinguish root causes from symptoms
>> when optimizing complex systems.
>>
>>
>>
>
>
> ---------------------------(end of broadcast)---------------------------
> TIP 9: the planner will ignore your desire to choose an index scan if
> your
> joining column's datatypes do not match