From: | Tomáš Uko <uko(at)avast(dot)com> |
---|---|
To: | Shreeyansh Dba <shreeyansh2014(at)gmail(dot)com> |
Cc: | pgsql-admin <pgsql-admin(at)postgresql(dot)org>, Petr Novák <novakp(at)avast(dot)com> |
Subject: | RE: streaming vs wal shipping issue |
Date: | 2019-02-27 08:08:02 |
Message-ID: | 4210f00664cd6947f76436b77ecb30b8@mail.gmail.com |
Views: | Raw Message | Whole Thread | Download mbox | Resend email |
Thread: | |
Lists: | pgsql-admin |
Hi agan,
Point is, that files, which are not deleted after recovery, are WAL files
present in DATA_DIR/pg_xlog directory …
Regards
Tomas Uko
*From:* Shreeyansh Dba <shreeyansh2014(at)gmail(dot)com>
*Sent:* úterý 26. února 2019 17:56
*To:* Tomáš Uko <uko(at)avast(dot)com>
*Cc:* pgsql-admin <pgsql-admin(at)postgresql(dot)org>; Petr Novák <novakp(at)avast(dot)com
>
*Subject:* Re: streaming vs wal shipping issue
PostgreSQL doesn't clean up files copied by your archive_command. You need
to have a separate task clean those out. PostgreSQL's active
wal_keep_segments etc. are in the data/pg_xlog directory.
Please have look at
http://www.postgresql.org/docs/9.4/interactive/pgarchivecleanup.html
Thanks & Regards,
*Shreeyansh DBA Team*
www.shreeyansh.com
On Tue, Feb 26, 2019 at 8:31 PM Tomáš Uko <uko(at)avast(dot)com> wrote:
Hi,
Just to clarify, we use both methods, everything is correctly set and when
there is no issue working … i.e. see this line from log:
2019-02-25 09:09:28.490 CET, pid: 2090891, client: , db: , usr: ; LOG:
started streaming WAL from primary at CE8B/17000000 on timeline 2
But problem appears once there is large enough replication lag, so
streaming replication just give up and it reverts to replaying WALs (which
is point of have both methods, so we don’t need to re-initialize
slave/replica again from master), until it catches up with master again
(and switches to streaming replication again). Only problem is, that those
WAL files copied from “master” (technically from shared storage server) are
never deleted from slave/replica pg_xlog directory (after they are replayed
on slave/replica).
Best regards
Tomas Uko
*From:* Shreeyansh Dba <shreeyansh2014(at)gmail(dot)com>
*Sent:* úterý 26. února 2019 14:01
*To:* Tomáš Uko <uko(at)avast(dot)com>
*Cc:* pgsql-admin <pgsql-admin(at)postgresql(dot)org>; Petr Novák <novakp(at)avast(dot)com
>
*Subject:* Re: streaming vs wal shipping issue
Hi Tomáš Uko,
Here you go in detail to understand the steaming vs wal shipping :
"Streaming replication" refers to continuous sending of WAL records over a
TCP/IP connection between the master and the replica, using the walsender
protocol over replication connections. The master reads its own WAL from
pg_xlog and sends it to the replica on demand. It's configured with a
primary_conninfo directive in recovery.conf and pg_hba.conf entries on the
master to permit replicationconnections. You also need wal_keep_segments and
some other options.
"Log shipping" refers to periodic sending of WAL records as whole WAL
archives via a file transfer protocol to an archive location from which the
replica can then fetch them. It's configured with a restore_command directive
in recovery.conf and an archive_command in the master. PostgreSQL doesn't
care where the files are or how they're transferred, only that the
archive_command puts them there and the restore_command fetches the
required archive.
Streaming replication doesn't have as much lag, as records are sent as they
are generated. However, it requires both master and replica to be online
and able to communicate directly. It also requires the replica to keep up
well enough that the master still has on-disk copies of the WAL the replica
needs, and generally requires you to spend extra pg_xlog space on retaining
extra WAL for the replica.
Thanks & Regards,
*Shreeyansh DBA Team*
www.shreeyansh.com
On Tue, Feb 26, 2019 at 2:56 PM Tomáš Uko <uko(at)avast(dot)com> wrote:
Hi all,
We have recently found weird issue with WAL being still present after
recovery (In fact, they are never deleted), this problem is on several
version (starting from 9.4 up to 9.6, possibly later).
Our setup is this:
- Master in one DC, with wal shipping to different storage/server
o Wal shipping via archive_command (pigz and scp - and we check return
codes J )
- Several replicas in different DCs, configured use streaming
replication as well as wal restore from that storage with archive_mode =
'on'
o snippet of recovery.conf:
standby_mode = 'on'
primary_conninfo = 'host=XY port=5432 user=AAA password=PASSWORD
sslmode=verify-full'
restore_command = '~/bin/wal_handler.sh -r -h REMOTE_STORAGE -f %f -p %p -d
LOCATION_ON_REMOTE_STORAGE'
This custom script does this:
[ -f “PARAM_P/PARAM_F " ] && { echo "Logfile PARAM_P/PARAM_F already
exists"; }
echo "Restoring xlog PARAM_F "
scp -i $SshKey -o PasswordAuthentication=no -o StrictHostKeyChecking=no
REMOTE_STORAGE:LOCATION_ON_REMOTE_STORAGE/PARAM_F.gz PARAM_P
[ $? == 0 ] || { echo "Failed to retrieve log PARAM_F from
REMOTE_STORAGE" && exit 1; }
unpigz -f PARAM_P/PARAM_F.gz
[ $? == 0 ] || { echo "Failed to unpack log to PARAM_P/PARAM_F.gz" &&
exit 1; }
When our master became under some massive DML workload (daily bases) some
of replicas stops using streaming replication and switch to wal restore (so
far good). Message in logs:
2019-02-25 23:10:03.087 CET, pid: 2100971, client: , db: , usr: ; LOG:
recovery restart point at CEA9/3007188
2019-02-25 23:10:03.087 CET, pid: 2100971, client: , db: , usr: ; DETAIL:
last completed transaction was at log time 2019-02-25 22:27:14.059533+01
2019-02-25 23:10:36.829 CET, pid: 2100971, client: , db: , usr: ; LOG:
restartpoint starting: xlog
2019-02-25 23:10:47.832 CET, pid: 2100974, client: , db: , usr: ; FATAL:
could not receive data from WAL stream: ERROR: requested WAL segment
000000020000CEA90000008A has already been removed
But once they start restoring wals, they never deletes afterwards. We’ve
discovered when there is restore point, it creates next wal segment in
sequence (in pg_xlog dir), which is immediately overwritten by restore.
With overwrite enabled logs are full of:
Restoring xlog 000000020000CE3900000029
Restoring xlog 000000020000CE390000002A
Restoring xlog 000000020000CE390000002B
Restoring xlog 000000020000CE390000002C
Restoring xlog 000000020000CE390000002D
Restoring xlog 000000020000CE390000002E
And once if catches up:
scp: /LOCATION_ON_REMOTE_STORAGE/000000020000CE8B00000017.gz: No such file
or directory
Failed to retrieve log 000000020000CE8B00000017 from REMOTE_STORAGE
2019-02-25 09:09:28.490 CET, pid: 2090891, client: , db: , usr: ; LOG:
started streaming WAL from primary at CE8B/17000000 on timeline 2
When we disabled overriding of WALs during restore we git this error message
2019-02-25 23:10:03.086 CET, pid: 2100971, client: , db: , usr: ; LOG:
restartpoint complete: wrote 142421 buffers (18.1%); 0 transaction log
file(s) added, 68 removed, 0 recycled; write=24.086 s, sync=0.022 s,
total=24.424 s; sync files=74, longest=0.005 s, average=0.000 s;
distance=1114130 kB, estimate=1114148 kB
2019-02-25 23:10:03.087 CET, pid: 2100971, client: , db: , usr: ; LOG:
recovery restart point at CEA9/3007188
2019-02-25 23:10:03.087 CET, pid: 2100971, client: , db: , usr: ; DETAIL:
last completed transaction was at log time 2019-02-25 22:27:14.059533+01
2019-02-25 23:10:36.829 CET, pid: 2100971, client: , db: , usr: ; LOG:
restartpoint starting: xlog
Logfile pg_xlog/000000020000CEA90000008A already exists
Restoring xlog 000000020000CEA90000008A
unpigz: abort: write error on pg_xlog/000000020000CEA90000008A
(Inappropriate ioctl for device)
Which means, wal file is present in this xlog directory
Thanks for any advice
From | Date | Subject | |
---|---|---|---|
Next Message | Achilleas Mantzios | 2019-02-27 08:54:11 | Index ignored on pkid = curval('some_seq'), used with pkid = (select curval(''some_seq') ) |
Previous Message | Shreeyansh Dba | 2019-02-27 06:14:49 | Re: [MASSMAIL]Re: pg_dumpall: could not connect to database: FATAL |