Re: [OT] found nagios plugins for monitoring Dell server

For anyone who needs nagios plugins to monitor the state of their raid
controllers and disk arrays for their Dell db servers

There is a nagios plugin for the megaraid controllers at
http://www.ibiblio.org/john/megaraid/

And a plugin for the accraid controllers at
http://www.iamafreeman.com/projects/nagios_plugins/

The developers of these plugins have both been really helpful, and the
plugins appear to work well. You need to have snmp installed on the
server to be monitored.

The accraid plugin gives info like:
OK: sda 52GB RAID 5 temp: 77F: 1 global hotspare, 4 ok
while the megaraid plugin gives an OK or Error message.

Hope that helps someone else in the future.

Johh Sidney-Woollett

John Sidney-Woollett wrote:

> I know that this is off topic, but I'm not getting anywhere and wondered
> if anyone has come across and solved this problem before.
>
> We use Nagios to monitor our servers. Our Dell PE 1550s and 1750s are
> monitored using a check_megaraid nagios plugin which uses SNMP and works
> fine.
>
> Our postgres databases are running on two Dell PE 2650s which use an
> aacraid (not megaraid) 3/di controller. This means that we need a
> different toolset to check the array.
>
> We currently appear to have three options:
>
> 1) Use the afacli (command line tool) to output the current array status
> and diff it against a previous known good state and report back accordingly
>
> 2) or setup snmp on the db server and modify the check_megaraid nagios
> plugin to check the response from the aacraid snmp reply (problem is
> that there is virtually no documentation on getting snmp configured for
> the aacraid controller)
>
> 3) or find someone who has already solved this problem
>
> Does anyone have a reliable way of monitoring the state of a Perc 3/di
> array which works with nagios that they'd like to share?
>
> Thanks to anyone who can help.
>
> John Sidney-Woollett
>
> ---------------------------(end of broadcast)---------------------------
> TIP 9: the planner will ignore your desire to choose an index scan if your
> joining column's datatypes do not match