Re: "postgres" is needed by initdb but was not found

From: Mark Kirkwood <mark(dot)kirkwood(at)catalyst(dot)net(dot)nz>
To: Mohammed Shahid Nawaz <mohammedshahid(dot)r(at)gmail(dot)com>, Shreeyansh Dba <shreeyansh2014(at)gmail(dot)com>
Cc: pgsql-admin <pgsql-admin(at)postgresql(dot)org>
Subject: Re: "postgres" is needed by initdb but was not found
Date: 2018-07-08 10:08:54
Message-ID: 22ccdf09-a7c7-7560-67ac-1d8f07a2ace8@catalyst.net.nz
Views: Raw Message | Whole Thread | Download mbox | Resend email
Thread:
Lists: pgsql-admin pgsql-novice

The message 'invalid binary' suggests the wrong architecture binaries
are installed (e.g 32 bit on 64 bit machine or vice versa). if you were
missing the initdb binary your would get a different message (e.g):

The The program "initdb" is needed by pg_ctl but was not found in the
same directory as "/usr/local/bin/pg_ctl".

regards
Mark

On 07/07/18 17:37, Mohammed Shahid Nawaz wrote:
> Hi Shreeyansh,
> Thank you for the feedback.
> The problem continues to exist even while using initdb command.
>
> I had been using pg_ctl to initiate a db in my earlier version 9.6.3
> as well.
>
> The command goes as follows, and its working on non-root user login
> for the same build version 10.4.
>
> su - postgres -c '/root/pgsql10x/bin/pg_ctl -D /root/pgsql10x/data/
> initdb'
>
>
> Thanks,
> Mohammed Shahid Nawaz
>
> On Sat 7 Jul, 2018, 10:42 AM Shreeyansh Dba, <shreeyansh2014(at)gmail(dot)com
> <mailto:shreeyansh2014(at)gmail(dot)com>> wrote:
>
> Hi Mohammed,
>
> As I suspect that you are trying to create a cluster but pg_ctl is
> a not a valid option to create a cluster.
>
> You can use initdb option for creating a cluster...
>
> Hope this helps.
>
>
> <http://www.shreeyansh.com>
>
> On Fri, Jul 6, 2018 at 11:16 PM, mohammed shahid
> <mohammedshahid(dot)r(at)gmail(dot)com <mailto:mohammedshahid(dot)r(at)gmail(dot)com>>
> wrote:
>
> Hi Kevin,
>
> I am new to this forum, but even i am facing this issue as
> reported where i
> get the below error.
>
>  sudo -u shahid ./pg_ctl -D /root/pgsql10x/data/ initdb
> invalid binary "/root/pgsql10x/bin/pg_ctl"
> invalid binary "/root/pgsql10x/bin/pg_ctl"
> invalid binary "/root/pgsql10x/bin/pg_ctl"
> The program "initdb" is needed by pg_ctl but was not found in the
> same directory as "pg_ctl".
> Check your installation.
>
> FYI ,
> I am trying to run this from root.
> As reported by H S, even i have built from the source. I am
> trying version
> 10. on CentOS7.
> I downloaded direct from postgres site.
> I am not facing this problem when i run as non-root user.
>
> I have all the files in the bin directory, as shared below,
>
> -rwxrwxrwx. 1 shahid shahid 7604946 Jul  6 17:19 postgres
> lrwxrwxrwx. 1 shahid shahid       8 Jul  6 17:19 postmaster ->
> postgres
> -rwxr-xr-x. 1 shahid shahid  908965 Jul  6 17:19 ecpg
> -rwxr-xr-x. 1 shahid shahid  128690 Jul  6 17:19 initdb
> -rwxr-xr-x. 1 shahid shahid   30548 Jul  6 17:19 pg_archivecleanup
> -rwxr-xr-x. 1 shahid shahid  112608 Jul  6 17:19 pg_basebackup
> -rwxr-xr-x. 1 shahid shahid   71241 Jul  6 17:19 pg_receivewal
> -rwxr-xr-x. 1 shahid shahid   72771 Jul  6 17:19 pg_recvlogical
> -rwxr-xr-x. 1 shahid shahid   30009 Jul  6 17:19 pg_config
> -rwxr-xr-x. 1 shahid shahid   39920 Jul  6 17:19 pg_controldata
> -rwxr-xr-x. 1 shahid shahid   58438 Jul  6 17:19 pg_ctl
> -rwxr-xr-x. 1 shahid shahid  400623 Jul  6 17:19 pg_dump
> -rwxr-xr-x. 1 shahid shahid  164991 Jul  6 17:19 pg_restore
> -rwxr-xr-x. 1 shahid shahid   97686 Jul  6 17:19 pg_dumpall
> -rwxr-xr-x. 1 shahid shahid   49138 Jul  6 17:19 pg_resetwal
> -rwxr-xr-x. 1 shahid shahid   88205 Jul  6 17:19 pg_rewind
> -rwxr-xr-x. 1 shahid shahid   31798 Jul  6 17:19 pg_test_fsync
> -rwxr-xr-x. 1 shahid shahid   26337 Jul  6 17:19 pg_test_timing
> -rwxr-xr-x. 1 shahid shahid  130515 Jul  6 17:19 pg_upgrade
> -rwxr-xr-x. 1 shahid shahid   86270 Jul  6 17:19 pg_waldump
> -rwxr-xr-x. 1 shahid shahid  141273 Jul  6 17:19 pgbench
> -rwxr-xr-x. 1 shahid shahid  454216 Jul  6 17:19 psql
> -rwxr-xr-x. 1 shahid shahid   60635 Jul  6 17:19 createdb
> -rwxr-xr-x. 1 shahid shahid   56335 Jul  6 17:19 dropdb
> -rwxr-xr-x. 1 shahid shahid   64416 Jul  6 17:19 createuser
> -rwxr-xr-x. 1 shahid shahid   56305 Jul  6 17:19 dropuser
> -rwxr-xr-x. 1 shahid shahid   61135 Jul  6 17:19 clusterdb
> -rwxr-xr-x. 1 shahid shahid   68735 Jul  6 17:19 vacuumdb
> -rwxr-xr-x. 1 shahid shahid   64047 Jul  6 17:19 reindexdb
> -rwxr-xr-x. 1 shahid shahid   59104 Jul  6 17:19 pg_isready
>
> Thanks
> Shahid
>
>
>
>
>
> --
> Sent from:
> http://www.postgresql-archive.org/PostgreSQL-admin-f2076596.html
>
>

In response to

Responses

Browse pgsql-admin by date

  From Date Subject
Next Message Mohammed Shahid Nawaz 2018-07-08 11:21:17 Re: "postgres" is needed by initdb but was not found
Previous Message Mohammed Shahid Nawaz 2018-07-07 05:37:11 Re: "postgres" is needed by initdb but was not found

Browse pgsql-novice by date

  From Date Subject
Next Message Mohammed Shahid Nawaz 2018-07-08 11:21:17 Re: "postgres" is needed by initdb but was not found
Previous Message Roberto Fichera 2018-07-07 11:56:54 How to recover after accidentally deleted and recreated some table in a db