Re: arm rc1 regression failures

Would you send us regression.diff? That should show the differences.

---------------------------------------------------------------------------

Jim Buttafuoco wrote:
> Just compiled RC1 on a netwinder ARM system running Debian Linux (sarge). All tests passed except "point" with the
> following in results/point
>
> Jim
>
>
> --
> -- POINT
> --
> CREATE TABLE POINT_TBL(f1 point);
> INSERT INTO POINT_TBL(f1) VALUES ('(0.0,0.0)');
> INSERT INTO POINT_TBL(f1) VALUES ('(-10.0,0.0)');
> INSERT INTO POINT_TBL(f1) VALUES ('(-3.0,4.0)');
> INSERT INTO POINT_TBL(f1) VALUES ('(5.1, 34.5)');
> INSERT INTO POINT_TBL(f1) VALUES ('(-5.0,-12.0)');
> -- bad format points
> INSERT INTO POINT_TBL(f1) VALUES ('asdfasdf');
> ERROR: invalid input syntax for type point: "asdfasdf"
> INSERT INTO POINT_TBL(f1) VALUES ('10.0,10.0');
> INSERT INTO POINT_TBL(f1) VALUES ('(10.0 10.0)');
> ERROR: invalid input syntax for type point: "(10.0 10.0)"
> INSERT INTO POINT_TBL(f1) VALUES ('(10.0,10.0');
> ERROR: invalid input syntax for type point: "(10.0,10.0"
> SELECT '' AS six, POINT_TBL.*;
> six | f1
> -----+------------
> | (0,0)
> | (-10,0)
> | (-3,4)
> | (5.1,34.5)
> | (-5,-12)
> | (10,10)
> (6 rows)
>
> -- left of
> SELECT '' AS three, p.* FROM POINT_TBL p WHERE p.f1 << '(0.0, 0.0)';
> three | f1
> -------+----------
> | (-10,0)
> | (-3,4)
> | (-5,-12)
> (3 rows)
>
> -- right of
> SELECT '' AS three, p.* FROM POINT_TBL p WHERE '(0.0,0.0)' >> p.f1;
> three | f1
> -------+----------
> | (-10,0)
> | (-3,4)
> | (-5,-12)
> (3 rows)
>
> -- above
> SELECT '' AS one, p.* FROM POINT_TBL p WHERE '(0.0,0.0)' >^ p.f1;
> one | f1
> -----+----------
> | (-5,-12)
> (1 row)
>
> -- below
> SELECT '' AS one, p.* FROM POINT_TBL p WHERE p.f1 <^ '(0.0, 0.0)';
> one | f1
> -----+----------
> | (-5,-12)
> (1 row)
>
> -- equal
> SELECT '' AS one, p.* FROM POINT_TBL p WHERE p.f1 ~= '(5.1, 34.5)';
> one | f1
> -----+------------
> | (5.1,34.5)
> (1 row)
>
> -- point in box
> SELECT '' AS three, p.* FROM POINT_TBL p
> WHERE p.f1 @ box '(0,0,100,100)';
> three | f1
> -------+------------
> | (0,0)
> | (5.1,34.5)
> | (10,10)
> (3 rows)
>
> SELECT '' AS three, p.* FROM POINT_TBL p
> WHERE not p.f1 @ box '(0,0,100,100)';
> three | f1
> -------+----------
> | (-10,0)
> | (-3,4)
> | (-5,-12)
> (3 rows)
>
> SELECT '' AS two, p.* FROM POINT_TBL p
> WHERE p.f1 @ path '[(0,0),(-10,0),(-10,10)]';
> two | f1
> -----+---------
> | (0,0)
> | (-10,0)
> (2 rows)
>
> SELECT '' AS six, p.f1, p.f1 <-> point '(0,0)' AS dist
> FROM POINT_TBL p
> ORDER BY dist;
> six | f1 | dist
> -----+------------+------------------
> | (0,0) | 0
> | (-3,4) | 5
> | (-10,0) | 10
> | (-5,-12) | 13
> | (10,10) | 14.1421356237309
> | (5.1,34.5) | 34.8749193547455
> (6 rows)
>
> SET geqo TO 'off';
> SELECT '' AS thirtysix, p1.f1 AS point1, p2.f1 AS point2, p1.f1 <-> p2.f1 AS dist
> FROM POINT_TBL p1, POINT_TBL p2
> ORDER BY dist, point1 using <<, point2 using <<;
> thirtysix | point1 | point2 | dist
> -----------+------------+------------+------------------
> | (-10,0) | (-10,0) | 0
> | (-5,-12) | (-5,-12) | 0
> | (-3,4) | (-3,4) | 0
> | (0,0) | (0,0) | 0
> | (5.1,34.5) | (5.1,34.5) | 0
> | (10,10) | (10,10) | 0
> | (-3,4) | (0,0) | 5
> | (0,0) | (-3,4) | 5
> | (-10,0) | (-3,4) | 8.06225774829855
> | (-3,4) | (-10,0) | 8.06225774829855
> | (-10,0) | (0,0) | 10
> | (0,0) | (-10,0) | 10
> | (-10,0) | (-5,-12) | 13
> | (-5,-12) | (-10,0) | 13
> | (-5,-12) | (0,0) | 13
> | (0,0) | (-5,-12) | 13
> | (0,0) | (10,10) | 14.1421356237309
> | (10,10) | (0,0) | 14.1421356237309
> | (-3,4) | (10,10) | 14.3178210632764
> | (10,10) | (-3,4) | 14.3178210632764
> | (-5,-12) | (-3,4) | 16.1245154965971
> | (-3,4) | (-5,-12) | 16.1245154965971
> | (-10,0) | (10,10) | 22.3606797749979
> | (10,10) | (-10,0) | 22.3606797749979
> | (5.1,34.5) | (10,10) | 24.9851956166046
> | (10,10) | (5.1,34.5) | 24.9851956166046
> | (-5,-12) | (10,10) | 26.6270539113887
> | (10,10) | (-5,-12) | 26.6270539113887
> | (-3,4) | (5.1,34.5) | 31.5572495632937
> | (5.1,34.5) | (-3,4) | 31.5572495632937
> | (0,0) | (5.1,34.5) | 34.8749193547455
> | (5.1,34.5) | (0,0) | 34.8749193547455
> | (-10,0) | (5.1,34.5) | 37.6597928831267
> | (5.1,34.5) | (-10,0) | 37.6597928831267
> | (-5,-12) | (5.1,34.5) | 47.5842410888311
> | (5.1,34.5) | (-5,-12) | 47.5842410888311
> (36 rows)
>
> SELECT '' AS thirty, p1.f1 AS point1, p2.f1 AS point2
> FROM POINT_TBL p1, POINT_TBL p2
> WHERE (p1.f1 <-> p2.f1) > 3;
> thirty | point1 | point2
> --------+------------+------------
> | (0,0) | (-10,0)
> | (0,0) | (-3,4)
> | (0,0) | (5.1,34.5)
> | (0,0) | (-5,-12)
> | (0,0) | (10,10)
> | (-10,0) | (0,0)
> | (-10,0) | (-3,4)
> | (-10,0) | (5.1,34.5)
> | (-10,0) | (-5,-12)
> | (-10,0) | (10,10)
> | (-3,4) | (0,0)
> | (-3,4) | (-10,0)
> | (-3,4) | (5.1,34.5)
> | (-3,4) | (-5,-12)
> | (-3,4) | (10,10)
> | (5.1,34.5) | (0,0)
> | (5.1,34.5) | (-10,0)
> | (5.1,34.5) | (-3,4)
> | (5.1,34.5) | (-5,-12)
> | (5.1,34.5) | (10,10)
> | (-5,-12) | (0,0)
> | (-5,-12) | (-10,0)
> | (-5,-12) | (-3,4)
> | (-5,-12) | (5.1,34.5)
> | (-5,-12) | (10,10)
> | (10,10) | (0,0)
> | (10,10) | (-10,0)
> | (10,10) | (-3,4)
> | (10,10) | (5.1,34.5)
> | (10,10) | (-5,-12)
> (30 rows)
>
> -- put distance result into output to allow sorting with GEQ optimizer - tgl 97/05/10
> SELECT '' AS fifteen, p1.f1 AS point1, p2.f1 AS point2, (p1.f1 <-> p2.f1) AS distance
> FROM POINT_TBL p1, POINT_TBL p2
> WHERE (p1.f1 <-> p2.f1) > 3 and p1.f1 << p2.f1
> ORDER BY distance, point1 using <<, point2 using <<;
> fifteen | point1 | point2 | distance
> ---------+------------+------------+------------------
> | (-3,4) | (0,0) | 5
> | (-10,0) | (-3,4) | 8.06225774829855
> | (-10,0) | (0,0) | 10
> | (-10,0) | (-5,-12) | 13
> | (-5,-12) | (0,0) | 13
> | (0,0) | (10,10) | 14.1421356237309
> | (-3,4) | (10,10) | 14.3178210632764
> | (-5,-12) | (-3,4) | 16.1245154965971
> | (-10,0) | (10,10) | 22.3606797749979
> | (5.1,34.5) | (10,10) | 24.9851956166046
> | (-5,-12) | (10,10) | 26.6270539113887
> | (-3,4) | (5.1,34.5) | 31.5572495632937
> | (0,0) | (5.1,34.5) | 34.8749193547455
> | (-10,0) | (5.1,34.5) | 37.6597928831267
> | (-5,-12) | (5.1,34.5) | 47.5842410888311
> (15 rows)
>
> -- put distance result into output to allow sorting with GEQ optimizer - tgl 97/05/10
> SELECT '' AS three, p1.f1 AS point1, p2.f1 AS point2, (p1.f1 <-> p2.f1) AS distance
> FROM POINT_TBL p1, POINT_TBL p2
> WHERE (p1.f1 <-> p2.f1) > 3 and p1.f1 << p2.f1 and p1.f1 >^ p2.f1
> ORDER BY distance;
> three | point1 | point2 | distance
> -------+------------+----------+------------------
> | (-3,4) | (0,0) | 5
> | (-10,0) | (-5,-12) | 13
> | (5.1,34.5) | (10,10) | 24.9851956166046
> (3 rows)
>
> RESET geqo;
>
> ---------------------------(end of broadcast)---------------------------
> TIP 9: the planner will ignore your desire to choose an index scan if your
> joining column's datatypes do not match
>

--
Bruce Momjian | http://candle.pha.pa.us
pgman(at)candle(dot)pha(dot)pa(dot)us | (610) 359-1001
+ If your life is a hard drive, | 13 Roberts Road
+ Christ can be your backup. | Newtown Square, Pennsylvania 19073