Re: crashes with postgresql 7.2.1 on IRIX 6.5

From: "Luis Alberto Amigo Navarro" <lamigo(at)atc(dot)unican(dot)es>
To: "Nicolae Mihalache" <mache(at)abcpages(dot)com>
Cc: <pgsql-hackers(at)postgresql(dot)org>
Subject: Re: crashes with postgresql 7.2.1 on IRIX 6.5
Date: 2002-10-23 16:33:53
Message-ID: 010101c27ab1$f98888f0$cab990c1@atc.unican.es
Views: Raw Message | Whole Thread | Download mbox | Resend email
Thread:
Lists: pgsql-hackers

System configuration looks fine to me, there is no upper limit, the only
configuration problem a can see is that stacksize limit is set to 512Mb when
u only have 256Mb ram, try "limit stacksize 65536" (64Mb) a most serious
size, if it does not help I can't be of any more help.
If it helps u may need to change hard limit(this is a soft limit) with
systune.
Regards

----- Original Message -----
From: "Nicolae Mihalache" <mache(at)abcpages(dot)com>
To: "Luis Alberto Amigo Navarro" <lamigo(at)atc(dot)unican(dot)es>
Cc: <pgsql-hackers(at)postgresql(dot)org>
Sent: Wednesday, October 23, 2002 6:09 PM
Subject: Re: crashes with postgresql 7.2.1 on IRIX 6.5

> Luis Alberto Amigo Navarro wrote:
> > could send the output from:
> > limit
> > and
> > systune | grep shm
> > also, what kind of machine is
> > regards
> >
> robust(at)cassini> limit
> cputime unlimited
> filesize unlimited
> datasize 2097152 kbytes
> stacksize 524288 kbytes
> coredumpsize unlimited
> memoryuse 524288 kbytes
> vmemoryuse 2097152 kbytes
> descriptors 2500
> threads 1024
>
> robust(at)cassini> systune |grep shm
> group: shm (statically changeable)
> sshmseg = 2000 (0x7d0)
> shmmni = 1064 (0x428)
> shmmin = 1 (0x1)
> shmmax = 214748365 (0xccccccd)
>
> robust(at)cassini> hinv
> CPU: MIPS R10000 Processor Chip Revision: 2.7
> FPU: MIPS R10010 Floating Point Chip Revision: 0.0
> 1 195 MHZ IP32 Processor
> Main memory size: 256 Mbytes
> Secondary unified instruction/data cache size: 1 Mbyte on Processor 0
> Instruction cache size: 32 Kbytes
> Data cache size: 32 Kbytes
> FLASH PROM version 4.17
> Integral SCSI controller 0: Version ADAPTEC 7880
> Disk drive: unit 2 on SCSI controller 0
> CDROM: unit 4 on SCSI controller 0
> Integral SCSI controller 1: Version ADAPTEC 7880
> Disk drive: unit 5 on SCSI controller 1
> On-board serial ports: tty1
> On-board serial ports: tty2
> On-board EPP/ECP parallel port
> CRM graphics installed
> Integral Ethernet: ec0, version 1
> Iris Audio Processor: version A3 revision 0
> Video: MVP unit 0 version 1.4
> AV: AV2 Card version 0, Camera not connected.
> Vice: TRE
> IEEE 1394 High performance serial bus controller 0: Type: OHCI, Version
> 0x104C-1 0
>
>

In response to

Responses

Browse pgsql-hackers by date

  From Date Subject
Next Message Nicolae Mihalache 2002-10-23 16:46:41 Re: crashes with postgresql 7.2.1 on IRIX 6.5
Previous Message Bruno Wolff III 2002-10-23 16:20:42 Re: PREPARE / EXECUTE