pg_dump — extract a PostgreSQL database into a script file or other archive file
pg_dump
[connection-option
...] [option
...] [dbname
]
pg_dump is a utility for backing up a PostgreSQL database. It makes consistent backups even if the database is being used concurrently. pg_dump does not block other users accessing the database (readers or writers).
pg_dump only dumps a single database. To back up an entire cluster, or to back up global objects that are common to all databases in a cluster (such as roles and tablespaces), use pg_dumpall.
Dumps can be output in script or archive file formats. Script dumps are plain-text files containing the SQL commands required to reconstruct the database to the state it was in at the time it was saved. To restore from such a script, feed it to psql. Script files can be used to reconstruct the database even on other machines and other architectures; with some modifications, even on other SQL database products.
The alternative archive file formats must be used with pg_restore to rebuild the database. They allow pg_restore to be selective about what is restored, or even to reorder the items prior to being restored. The archive file formats are designed to be portable across architectures.
When used with one of the archive file formats and combined with pg_restore, pg_dump provides a flexible archival and transfer mechanism. pg_dump can be used to backup an entire database, then pg_restore can be used to examine the archive and/or select which parts of the database are to be restored. The most flexible output file formats are the “custom” format (-Fc
) and the “directory” format (-Fd
). They allow for selection and reordering of all archived items, support parallel restoration, and are compressed by default. The “directory” format is the only format that supports parallel dumps.
While running pg_dump, one should examine the output for any warnings (printed on standard error), especially in light of the limitations listed below.
The following command-line options control the content and format of the output.
dbname
Specifies the name of the database to be dumped. If this is not specified, the environment variable PGDATABASE
is used. If that is not set, the user name specified for the connection is used.
-a
--data-only
Dump only the data, not the schema (data definitions). Table data, large objects, and sequence values are dumped.
This option is similar to, but for historical reasons not identical to, specifying --section=data
.
-b
--large-objects
--blobs
(deprecated)Include large objects in the dump. This is the default behavior except when --schema
, --table
, or --schema-only
is specified. The -b
switch is therefore only useful to add large objects to dumps where a specific schema or table has been requested. Note that large objects are considered data and therefore will be included when --data-only
is used, but not when --schema-only
is.
-B
--no-large-objects
--no-blobs
(deprecated)Exclude large objects in the dump.
When both -b
and -B
are given, the behavior is to output large objects, when data is being dumped, see the -b
documentation.
-c
--clean
Output commands to DROP
all the dumped database objects prior to outputting the commands for creating them. This option is useful when the restore is to overwrite an existing database. If any of the objects do not exist in the destination database, ignorable error messages will be reported during restore, unless --if-exists
is also specified.
This option is ignored when emitting an archive (non-text) output file. For the archive formats, you can specify the option when you call pg_restore
.
-C
--create
Begin the output with a command to create the database itself and reconnect to the created database. (With a script of this form, it doesn't matter which database in the destination installation you connect to before running the script.) If --clean
is also specified, the script drops and recreates the target database before reconnecting to it.
With --create
, the output also includes the database's comment if any, and any configuration variable settings that are specific to this database, that is, any ALTER DATABASE ... SET ...
and ALTER ROLE ... IN DATABASE ... SET ...
commands that mention this database. Access privileges for the database itself are also dumped, unless --no-acl
is specified.
This option is ignored when emitting an archive (non-text) output file. For the archive formats, you can specify the option when you call pg_restore
.
-e pattern
--extension=pattern
Dump only extensions matching pattern
. When this option is not specified, all non-system extensions in the target database will be dumped. Multiple extensions can be selected by writing multiple -e
switches. The pattern
parameter is interpreted as a pattern according to the same rules used by psql's \d
commands (see Patterns), so multiple extensions can also be selected by writing wildcard characters in the pattern. When using wildcards, be careful to quote the pattern if needed to prevent the shell from expanding the wildcards.
Any configuration relation registered by pg_extension_config_dump
is included in the dump if its extension is specified by --extension
.
When -e
is specified, pg_dump makes no attempt to dump any other database objects that the selected extension(s) might depend upon. Therefore, there is no guarantee that the results of a specific-extension dump can be successfully restored by themselves into a clean database.
-E encoding
--encoding=encoding
Create the dump in the specified character set encoding. By default, the dump is created in the database encoding. (Another way to get the same result is to set the PGCLIENTENCODING
environment variable to the desired dump encoding.) The supported encodings are described in Section 24.3.1.
-f file
--file=file
Send output to the specified file. This parameter can be omitted for file based output formats, in which case the standard output is used. It must be given for the directory output format however, where it specifies the target directory instead of a file. In this case the directory is created by pg_dump
and must not exist before.
-F format
--format=format
Selects the format of the output. format
can be one of the following:
p
plain
Output a plain-text SQL script file (the default).
c
custom
Output a custom-format archive suitable for input into pg_restore. Together with the directory output format, this is the most flexible output format in that it allows manual selection and reordering of archived items during restore. This format is also compressed by default.
d
directory
Output a directory-format archive suitable for input into pg_restore. This will create a directory with one file for each table and large object being dumped, plus a so-called Table of Contents file describing the dumped objects in a machine-readable format that pg_restore can read. A directory format archive can be manipulated with standard Unix tools; for example, files in an uncompressed archive can be compressed with the gzip, lz4, or zstd tools. This format is compressed by default using gzip
and also supports parallel dumps.
t
tar
Output a tar
-format archive suitable for input into pg_restore. The tar format is compatible with the directory format: extracting a tar-format archive produces a valid directory-format archive. However, the tar format does not support compression. Also, when using tar format the relative order of table data items cannot be changed during restore.
-j njobs
--jobs=njobs
Run the dump in parallel by dumping njobs
tables simultaneously. This option may reduce the time needed to perform the dump but it also increases the load on the database server. You can only use this option with the directory output format because this is the only output format where multiple processes can write their data at the same time.
pg_dump will open njobs
+ 1 connections to the database, so make sure your max_connections setting is high enough to accommodate all connections.
Requesting exclusive locks on database objects while running a parallel dump could cause the dump to fail. The reason is that the pg_dump leader process requests shared locks (ACCESS SHARE) on the objects that the worker processes are going to dump later in order to make sure that nobody deletes them and makes them go away while the dump is running. If another client then requests an exclusive lock on a table, that lock will not be granted but will be queued waiting for the shared lock of the leader process to be released. Consequently any other access to the table will not be granted either and will queue after the exclusive lock request. This includes the worker process trying to dump the table. Without any precautions this would be a classic deadlock situation. To detect this conflict, the pg_dump worker process requests another shared lock using the NOWAIT
option. If the worker process is not granted this shared lock, somebody else must have requested an exclusive lock in the meantime and there is no way to continue with the dump, so pg_dump has no choice but to abort the dump.
To perform a parallel dump, the database server needs to support synchronized snapshots, a feature that was introduced in PostgreSQL 9.2 for primary servers and 10 for standbys. With this feature, database clients can ensure they see the same data set even though they use different connections. pg_dump -j
uses multiple database connections; it connects to the database once with the leader process and once again for each worker job. Without the synchronized snapshot feature, the different worker jobs wouldn't be guaranteed to see the same data in each connection, which could lead to an inconsistent backup.
-n pattern
--schema=pattern
Dump only schemas matching pattern
; this selects both the schema itself, and all its contained objects. When this option is not specified, all non-system schemas in the target database will be dumped. Multiple schemas can be selected by writing multiple -n
switches. The pattern
parameter is interpreted as a pattern according to the same rules used by psql's \d
commands (see Patterns), so multiple schemas can also be selected by writing wildcard characters in the pattern. When using wildcards, be careful to quote the pattern if needed to prevent the shell from expanding the wildcards; see Examples below.
When -n
is specified, pg_dump makes no attempt to dump any other database objects that the selected schema(s) might depend upon. Therefore, there is no guarantee that the results of a specific-schema dump can be successfully restored by themselves into a clean database.
Non-schema objects such as large objects are not dumped when -n
is specified. You can add large objects back to the dump with the --large-objects
switch.
-N pattern
--exclude-schema=pattern
Do not dump any schemas matching pattern
. The pattern is interpreted according to the same rules as for -n
. -N
can be given more than once to exclude schemas matching any of several patterns.
When both -n
and -N
are given, the behavior is to dump just the schemas that match at least one -n
switch but no -N
switches. If -N
appears without -n
, then schemas matching -N
are excluded from what is otherwise a normal dump.
-O
--no-owner
Do not output commands to set ownership of objects to match the original database. By default, pg_dump issues ALTER OWNER
or SET SESSION AUTHORIZATION
statements to set ownership of created database objects. These statements will fail when the script is run unless it is started by a superuser (or the same user that owns all of the objects in the script). To make a script that can be restored by any user, but will give that user ownership of all the objects, specify -O
.
This option is ignored when emitting an archive (non-text) output file. For the archive formats, you can specify the option when you call pg_restore
.
-R
--no-reconnect
This option is obsolete but still accepted for backwards compatibility.
-s
--schema-only
Dump only the object definitions (schema), not data.
This option is the inverse of --data-only
. It is similar to, but for historical reasons not identical to, specifying --section=pre-data --section=post-data
.
(Do not confuse this with the --schema
option, which uses the word “schema” in a different meaning.)
To exclude table data for only a subset of tables in the database, see --exclude-table-data
.
-S username
--superuser=username
Specify the superuser user name to use when disabling triggers. This is relevant only if --disable-triggers
is used. (Usually, it's better to leave this out, and instead start the resulting script as superuser.)
-t pattern
--table=pattern
Dump only tables with names matching pattern
. Multiple tables can be selected by writing multiple -t
switches. The pattern
parameter is interpreted as a pattern according to the same rules used by psql's \d
commands (see Patterns), so multiple tables can also be selected by writing wildcard characters in the pattern. When using wildcards, be careful to quote the pattern if needed to prevent the shell from expanding the wildcards; see Examples below.
As well as tables, this option can be used to dump the definition of matching views, materialized views, foreign tables, and sequences. It will not dump the contents of views or materialized views, and the contents of foreign tables will only be dumped if the corresponding foreign server is specified with --include-foreign-data
.
The -n
and -N
switches have no effect when -t
is used, because tables selected by -t
will be dumped regardless of those switches, and non-table objects will not be dumped.
When -t
is specified, pg_dump makes no attempt to dump any other database objects that the selected table(s) might depend upon. Therefore, there is no guarantee that the results of a specific-table dump can be successfully restored by themselves into a clean database.
-T pattern
--exclude-table=pattern
Do not dump any tables matching pattern
. The pattern is interpreted according to the same rules as for -t
. -T
can be given more than once to exclude tables matching any of several patterns.
When both -t
and -T
are given, the behavior is to dump just the tables that match at least one -t
switch but no -T
switches. If -T
appears without -t
, then tables matching -T
are excluded from what is otherwise a normal dump.
-v
--verbose
Specifies verbose mode. This will cause pg_dump to output detailed object comments and start/stop times to the dump file, and progress messages to standard error. Repeating the option causes additional debug-level messages to appear on standard error.
-V
--version
Print the pg_dump version and exit.
-x
--no-privileges
--no-acl
Prevent dumping of access privileges (grant/revoke commands).
-Z level
-Z method
[:detail
]--compress=level
--compress=method
[:detail
]Specify the compression method and/or the compression level to use. The compression method can be set to gzip
, lz4
, zstd
, or none
for no compression. A compression detail string can optionally be specified. If the detail string is an integer, it specifies the compression level. Otherwise, it should be a comma-separated list of items, each of the form keyword
or keyword=value
. Currently, the supported keywords are level
and long
.
If no compression level is specified, the default compression level will be used. If only a level is specified without mentioning an algorithm, gzip
compression will be used if the level is greater than 0
, and no compression will be used if the level is 0
.
For the custom and directory archive formats, this specifies compression of individual table-data segments, and the default is to compress using gzip
at a moderate level. For plain text output, setting a nonzero compression level causes the entire output file to be compressed, as though it had been fed through gzip, lz4, or zstd; but the default is not to compress. With zstd compression, long
mode may improve the compression ratio, at the cost of increased memory use.
The tar archive format currently does not support compression at all.
--binary-upgrade
This option is for use by in-place upgrade utilities. Its use for other purposes is not recommended or supported. The behavior of the option may change in future releases without notice.
--column-inserts
--attribute-inserts
Dump data as INSERT
commands with explicit column names (INSERT INTO
). This will make restoration very slow; it is mainly useful for making dumps that can be loaded into non-PostgreSQL databases. Any error during restoring will cause only rows that are part of the problematic table
(column
, ...) VALUES ...INSERT
to be lost, rather than the entire table contents.
--disable-dollar-quoting
This option disables the use of dollar quoting for function bodies, and forces them to be quoted using SQL standard string syntax.
--disable-triggers
This option is relevant only when creating a data-only dump. It instructs pg_dump to include commands to temporarily disable triggers on the target tables while the data is restored. Use this if you have referential integrity checks or other triggers on the tables that you do not want to invoke during data restore.
Presently, the commands emitted for --disable-triggers
must be done as superuser. So, you should also specify a superuser name with -S
, or preferably be careful to start the resulting script as a superuser.
This option is ignored when emitting an archive (non-text) output file. For the archive formats, you can specify the option when you call pg_restore
.
--enable-row-security
This option is relevant only when dumping the contents of a table which has row security. By default, pg_dump will set row_security to off, to ensure that all data is dumped from the table. If the user does not have sufficient privileges to bypass row security, then an error is thrown. This parameter instructs pg_dump to set row_security to on instead, allowing the user to dump the parts of the contents of the table that they have access to.
Note that if you use this option currently, you probably also want the dump be in INSERT
format, as the COPY FROM
during restore does not support row security.
--exclude-table-and-children=pattern
This is the same as the -T
/--exclude-table
option, except that it also excludes any partitions or inheritance child tables of the table(s) matching the pattern
.
--exclude-table-data=pattern
Do not dump data for any tables matching pattern
. The pattern is interpreted according to the same rules as for -t
. --exclude-table-data
can be given more than once to exclude tables matching any of several patterns. This option is useful when you need the definition of a particular table even though you do not need the data in it.
To exclude data for all tables in the database, see --schema-only
.
--exclude-table-data-and-children=pattern
This is the same as the --exclude-table-data
option, except that it also excludes data of any partitions or inheritance child tables of the table(s) matching the pattern
.
--extra-float-digits=ndigits
Use the specified value of extra_float_digits
when dumping floating-point data, instead of the maximum available precision. Routine dumps made for backup purposes should not use this option.
--if-exists
Use DROP ... IF EXISTS
commands to drop objects in --clean
mode. This suppresses “does not exist” errors that might otherwise be reported. This option is not valid unless --clean
is also specified.
--include-foreign-data=foreignserver
Dump the data for any foreign table with a foreign server matching foreignserver
pattern. Multiple foreign servers can be selected by writing multiple --include-foreign-data
switches. Also, the foreignserver
parameter is interpreted as a pattern according to the same rules used by psql's \d
commands (see Patterns), so multiple foreign servers can also be selected by writing wildcard characters in the pattern. When using wildcards, be careful to quote the pattern if needed to prevent the shell from expanding the wildcards; see Examples below. The only exception is that an empty pattern is disallowed.
Using wildcards in --include-foreign-data
may result in access to unexpected foreign servers. Also, to use this option securely, make sure that the named server must have a trusted owner.
When --include-foreign-data
is specified, pg_dump does not check that the foreign table is writable. Therefore, there is no guarantee that the results of a foreign table dump can be successfully restored.
--inserts
Dump data as INSERT
commands (rather than COPY
). This will make restoration very slow; it is mainly useful for making dumps that can be loaded into non-PostgreSQL databases. Any error during restoring will cause only rows that are part of the problematic INSERT
to be lost, rather than the entire table contents. Note that the restore might fail altogether if you have rearranged column order. The --column-inserts
option is safe against column order changes, though even slower.
--load-via-partition-root
When dumping data for a table partition, make the COPY
or INSERT
statements target the root of the partitioning hierarchy that contains it, rather than the partition itself. This causes the appropriate partition to be re-determined for each row when the data is loaded. This may be useful when restoring data on a server where rows do not always fall into the same partitions as they did on the original server. That could happen, for example, if the partitioning column is of type text and the two systems have different definitions of the collation used to sort the partitioning column.
--lock-wait-timeout=timeout
Do not wait forever to acquire shared table locks at the beginning of the dump. Instead fail if unable to lock a table within the specified timeout
. The timeout may be specified in any of the formats accepted by SET statement_timeout
. (Allowed formats vary depending on the server version you are dumping from, but an integer number of milliseconds is accepted by all versions.)
--no-comments
Do not dump comments.
--no-publications
Do not dump publications.
--no-security-labels
Do not dump security labels.
--no-subscriptions
Do not dump subscriptions.
--no-sync
By default, pg_dump
will wait for all files to be written safely to disk. This option causes pg_dump
to return without waiting, which is faster, but means that a subsequent operating system crash can leave the dump corrupt. Generally, this option is useful for testing but should not be used when dumping data from production installation.
--no-table-access-method
Do not output commands to select table access methods. With this option, all objects will be created with whichever table access method is the default during restore.
This option is ignored when emitting an archive (non-text) output file. For the archive formats, you can specify the option when you call pg_restore
.
--no-tablespaces
Do not output commands to select tablespaces. With this option, all objects will be created in whichever tablespace is the default during restore.
This option is ignored when emitting an archive (non-text) output file. For the archive formats, you can specify the option when you call pg_restore
.
--no-toast-compression
Do not output commands to set TOAST compression methods. With this option, all columns will be restored with the default compression setting.
--no-unlogged-table-data
Do not dump the contents of unlogged tables and sequences. This option has no effect on whether or not the table and sequence definitions (schema) are dumped; it only suppresses dumping the table and sequence data. Data in unlogged tables and sequences is always excluded when dumping from a standby server.
--on-conflict-do-nothing
Add ON CONFLICT DO NOTHING
to INSERT
commands. This option is not valid unless --inserts
, --column-inserts
or --rows-per-insert
is also specified.
--quote-all-identifiers
Force quoting of all identifiers. This option is recommended when dumping a database from a server whose PostgreSQL major version is different from pg_dump's, or when the output is intended to be loaded into a server of a different major version. By default, pg_dump quotes only identifiers that are reserved words in its own major version. This sometimes results in compatibility issues when dealing with servers of other versions that may have slightly different sets of reserved words. Using --quote-all-identifiers
prevents such issues, at the price of a harder-to-read dump script.
--rows-per-insert=nrows
Dump data as INSERT
commands (rather than COPY
). Controls the maximum number of rows per INSERT
command. The value specified must be a number greater than zero. Any error during restoring will cause only rows that are part of the problematic INSERT
to be lost, rather than the entire table contents.
--section=sectionname
Only dump the named section. The section name can be pre-data
, data
, or post-data
. This option can be specified more than once to select multiple sections. The default is to dump all sections.
The data section contains actual table data, large-object contents, and sequence values. Post-data items include definitions of indexes, triggers, rules, and constraints other than validated check constraints. Pre-data items include all other data definition items.
--serializable-deferrable
Use a serializable
transaction for the dump, to ensure that the snapshot used is consistent with later database states; but do this by waiting for a point in the transaction stream at which no anomalies can be present, so that there isn't a risk of the dump failing or causing other transactions to roll back with a serialization_failure
. See Chapter 13 for more information about transaction isolation and concurrency control.
This option is not beneficial for a dump which is intended only for disaster recovery. It could be useful for a dump used to load a copy of the database for reporting or other read-only load sharing while the original database continues to be updated. Without it the dump may reflect a state which is not consistent with any serial execution of the transactions eventually committed. For example, if batch processing techniques are used, a batch may show as closed in the dump without all of the items which are in the batch appearing.
This option will make no difference if there are no read-write transactions active when pg_dump is started. If read-write transactions are active, the start of the dump may be delayed for an indeterminate length of time. Once running, performance with or without the switch is the same.
--snapshot=snapshotname
Use the specified synchronized snapshot when making a dump of the database (see Table 9.94 for more details).
This option is useful when needing to synchronize the dump with a logical replication slot (see Chapter 49) or with a concurrent session.
In the case of a parallel dump, the snapshot name defined by this option is used rather than taking a new snapshot.
--strict-names
Require that each extension (-e
/--extension
), schema (-n
/--schema
) and table (-t
/--table
) pattern match at least one extension/schema/table in the database to be dumped. Note that if none of the extension/schema/table patterns find matches, pg_dump will generate an error even without --strict-names
.
This option has no effect on -N
/--exclude-schema
, -T
/--exclude-table
, or --exclude-table-data
. An exclude pattern failing to match any objects is not considered an error.
--table-and-children=pattern
This is the same as the -t
/--table
option, except that it also includes any partitions or inheritance child tables of the table(s) matching the pattern
.
--use-set-session-authorization
Output SQL-standard SET SESSION AUTHORIZATION
commands instead of ALTER OWNER
commands to determine object ownership. This makes the dump more standards-compatible, but depending on the history of the objects in the dump, might not restore properly. Also, a dump using SET SESSION AUTHORIZATION
will certainly require superuser privileges to restore correctly, whereas ALTER OWNER
requires lesser privileges.
-?
--help
Show help about pg_dump command line arguments, and exit.
The following command-line options control the database connection parameters.
-d dbname
--dbname=dbname
Specifies the name of the database to connect to. This is equivalent to specifying dbname
as the first non-option argument on the command line. The dbname
can be a connection string. If so, connection string parameters will override any conflicting command line options.
-h host
--host=host
Specifies the host name of the machine on which the server is running. If the value begins with a slash, it is used as the directory for the Unix domain socket. The default is taken from the PGHOST
environment variable, if set, else a Unix domain socket connection is attempted.
-p port
--port=port
Specifies the TCP port or local Unix domain socket file extension on which the server is listening for connections. Defaults to the PGPORT
environment variable, if set, or a compiled-in default.
-U username
--username=username
User name to connect as.
-w
--no-password
Never issue a password prompt. If the server requires password authentication and a password is not available by other means such as a .pgpass
file, the connection attempt will fail. This option can be useful in batch jobs and scripts where no user is present to enter a password.
-W
--password
Force pg_dump to prompt for a password before connecting to a database.
This option is never essential, since pg_dump will automatically prompt for a password if the server demands password authentication. However, pg_dump will waste a connection attempt finding out that the server wants a password. In some cases it is worth typing -W
to avoid the extra connection attempt.
--role=rolename
Specifies a role name to be used to create the dump. This option causes pg_dump to issue a SET ROLE
rolename
command after connecting to the database. It is useful when the authenticated user (specified by -U
) lacks privileges needed by pg_dump, but can switch to a role with the required rights. Some installations have a policy against logging in directly as a superuser, and use of this option allows dumps to be made without violating the policy.
PGDATABASE
PGHOST
PGOPTIONS
PGPORT
PGUSER
Default connection parameters.
PG_COLOR
Specifies whether to use color in diagnostic messages. Possible values are always
, auto
and never
.
This utility, like most other PostgreSQL utilities, also uses the environment variables supported by libpq (see Section 34.15).
pg_dump internally executes SELECT
statements. If you have problems running pg_dump, make sure you are able to select information from the database using, for example, psql. Also, any default connection settings and environment variables used by the libpq front-end library will apply.
The database activity of pg_dump is normally collected by the cumulative statistics system. If this is undesirable, you can set parameter track_counts
to false via PGOPTIONS
or the ALTER USER
command.
If your database cluster has any local additions to the template1
database, be careful to restore the output of pg_dump into a truly empty database; otherwise you are likely to get errors due to duplicate definitions of the added objects. To make an empty database without any local additions, copy from template0
not template1
, for example:
CREATE DATABASE foo WITH TEMPLATE template0;
When a data-only dump is chosen and the option --disable-triggers
is used, pg_dump emits commands to disable triggers on user tables before inserting the data, and then commands to re-enable them after the data has been inserted. If the restore is stopped in the middle, the system catalogs might be left in the wrong state.
The dump file produced by pg_dump does not contain the statistics used by the optimizer to make query planning decisions. Therefore, it is wise to run ANALYZE
after restoring from a dump file to ensure optimal performance; see Section 25.1.3 and Section 25.1.6 for more information.
Because pg_dump is used to transfer data to newer versions of PostgreSQL, the output of pg_dump can be expected to load into PostgreSQL server versions newer than pg_dump's version. pg_dump can also dump from PostgreSQL servers older than its own version. (Currently, servers back to version 9.2 are supported.) However, pg_dump cannot dump from PostgreSQL servers newer than its own major version; it will refuse to even try, rather than risk making an invalid dump. Also, it is not guaranteed that pg_dump's output can be loaded into a server of an older major version — not even if the dump was taken from a server of that version. Loading a dump file into an older server may require manual editing of the dump file to remove syntax not understood by the older server. Use of the --quote-all-identifiers
option is recommended in cross-version cases, as it can prevent problems arising from varying reserved-word lists in different PostgreSQL versions.
When dumping logical replication subscriptions, pg_dump will generate CREATE SUBSCRIPTION
commands that use the connect = false
option, so that restoring the subscription does not make remote connections for creating a replication slot or for initial table copy. That way, the dump can be restored without requiring network access to the remote servers. It is then up to the user to reactivate the subscriptions in a suitable way. If the involved hosts have changed, the connection information might have to be changed. It might also be appropriate to truncate the target tables before initiating a new full table copy. If users intend to copy initial data during refresh they must create the slot with two_phase = false
. After the initial sync, the two_phase
option will be automatically enabled by the subscriber if the subscription had been originally created with two_phase = true
option.
To dump a database called mydb
into an SQL-script file:
$
pg_dump mydb > db.sql
To reload such a script into a (freshly created) database named newdb
:
$
psql -d newdb -f db.sql
To dump a database into a custom-format archive file:
$
pg_dump -Fc mydb > db.dump
To dump a database into a directory-format archive:
$
pg_dump -Fd mydb -f dumpdir
To dump a database into a directory-format archive in parallel with 5 worker jobs:
$
pg_dump -Fd mydb -j 5 -f dumpdir
To reload an archive file into a (freshly created) database named newdb
:
$
pg_restore -d newdb db.dump
To reload an archive file into the same database it was dumped from, discarding the current contents of that database:
$
pg_restore -d postgres --clean --create db.dump
To dump a single table named mytab
:
$
pg_dump -t mytab mydb > db.sql
To dump all tables whose names start with emp
in the detroit
schema, except for the table named employee_log
:
$
pg_dump -t 'detroit.emp*' -T detroit.employee_log mydb > db.sql
To dump all schemas whose names start with east
or west
and end in gsm
, excluding any schemas whose names contain the word test
:
$
pg_dump -n 'east*gsm' -n 'west*gsm' -N '*test*' mydb > db.sql
The same, using regular expression notation to consolidate the switches:
$
pg_dump -n '(east|west)*gsm' -N '*test*' mydb > db.sql
To dump all database objects except for tables whose names begin with ts_
:
$
pg_dump -T 'ts_*' mydb > db.sql
To specify an upper-case or mixed-case name in -t
and related switches, you need to double-quote the name; else it will be folded to lower case (see Patterns). But double quotes are special to the shell, so in turn they must be quoted. Thus, to dump a single table with a mixed-case name, you need something like
$
pg_dump -t "\"MixedCaseName\"" mydb > mytab.sql
If you see anything in the documentation that is not correct, does not match your experience with the particular feature or requires further clarification, please use this form to report a documentation issue.